El sáb, 27-05-2006 a las 09:22 -0300, Víctor Adrián escribió: > Hola! > Compré una multifunción Epson cx3700. Descargué los drivers de > http://www.avasys.jp/english/linux_e/dl_scan.html > La impresora funcionó perfecto ahora el escaner no lo logré hacer funcionar. > Hice lo siguiente: > > > Seguí los pasos según el kernel (primero lo hice con el 2.6.10) > > [EMAIL PROTECTED]:/home/victorino#sane-find-scanner | grep 0x04b8 > found USB scanner (vendor=0x04b8 [EPSON], product=0x0818 [USB MFP]) at > libusb:001:004 > > [EMAIL PROTECTED]:/home/victorino#chmod 0666 /proc/bus/usb/001/004 > > [EMAIL PROTECTED]:/home/victorino#mcedit /etc/sane.d/epkowa.conf > # epkowa.conf -- sample configuration for the EPKOWA SANE backend > # Copyright (C) 2004 Olaf Meeuwissen > > # On systems with libusb, the following line is sufficient to get the > # backend to recognise your USB scanners. It presumes, however, that > # the scanner---more precisely, it's USB product ID---is known to the > # backend. > # For all USB scanners that are officially supported by this backend, > # this presumption is true. A list of such scanners can be found in > # sane-epkowa(5). > # > usb 0x04b8 0x0818 > > # For any USB scanner not known to the backend (yet), you may, at your > # own peril(!!), force the backend to recognise and use it via libusb. > # You can do so by the following configuration command: > # > # usb <USB vendor ID> <USB product ID> > # > # SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes). In order > # to find the USB product ID, use lsusb(1) or, on Linux systems, peek > # at the information in /proc/bus/usb/devices. > # A sample configuration for the Perfection 1650 (GT-8200), which has > # a product ID of 0x0110, would look as follows: > > > Luego ejecuté > [EMAIL PROTECTED]:~$ iscan > y no lo detectó > Bien, también lo hice con el kernel 2.4.31 y tampoco pasó nada (probé > cargando > el modulo del escaner como indica > # modprobe scanner vendor=0x04b8 product=0x0818 > y modifiqué el /etc/sane.d/epkowa.conf > y no pasó nada. > > Alguna idea? Lo peor de todo es que lo uso para trabajar. Lo compré ampliando > el negocio. A su vez NO USO WINDOWS. Quiero usar sólo LINUX. > desde ya GRACIAS!! > > -------------------------------------------------------------------------- > Víctor Adrián Amelotti > > Slackware 10.2 - Kernel 2.6.10 > Usuario de Linux registrado #392510 > http://counter.li.org/ > http://www.slackware.com/ > http://slax.linux-live.org/ > Alta Gracia - Córdoba - Argentina > -------------------------------------------------------------------------- > > > > > ___________________________________________________________ > 1GB gratis, Antivirus y Antispam > Correo Yahoo!, el mejor correo web del mundo > http://correo.yahoo.com.ar >
lo bajastes del lugar equivocado. Tu impresora es un all in one Tenes que bajar el driver de la seccion all in one -- Diego Alcorta <[EMAIL PROTECTED]>
-- Para desuscribirte tenés que visitar la página https://listas.linux.org.ar/mailman/listinfo/lugar-gral/ /* Publica y encontra trabajo relacionado con softlibre en http://www.usla.org.ar/modules/jobs/ */ Si tenés algún inconveniente o consulta escribí a mailto:[EMAIL PROTECTED]
