Zivijo!
Mgetty uporablja default inicializacijski string, ki ga lahko v
mgetty.conf-u spremenis. Ocitno je, da mu pri default stringu nekaj ne pase.
Modem enega od AT ukazov ne razume in se ne postavi pravilno. Napisi na roke
init string pa bo slo.
Lep pozdrav!
Jure
gdb wrote:
> Poskusal sem instalirat mgetty, da bi lahko uporabljal callback feature,
> a se je zataknilo ze na zacetku. Problem je v tem (vsaj po mojem mneju),
> da modem in mgetty ne znata komunicirati. Tule je izpis iz mgetty.ttyS0
> loga :
> ----------------------------------------------------------------
> 09/24 23:27:51 yS0 check for lockfiles
> 09/24 23:27:51 yS0 checklock: stat failed, no file
> 09/24 23:27:51 yS0 locking the line
> 09/24 23:27:51 yS0 makelock(ttyS0) called
> 09/24 23:27:51 yS0 do_makelock: lock='/var/lock/LCK..ttyS0'
> 09/24 23:27:51 yS0 lock made
> 09/24 23:27:52 yS0 tio_get_rs232_lines: status: RTS CTS DSR DTR
> 09/24 23:27:52 yS0 lowering DTR to reset Modem
> 09/24 23:27:52 yS0 tss: set speed to 38400 (017)
> 09/24 23:27:52 yS0 tio_set_flow_control( HARD )
> 09/24 23:27:52 yS0 waiting for line to clear (VTIME), read:
> 09/24 23:27:52 yS0 send: ATZ[0d]
> 09/24 23:27:53 yS0 waiting for ``OK''
> 09/24 23:27:53 yS0 got: ATZ[0d]
> 09/24 23:28:13 yS0 timeout in chat script, waiting for `OK'
> 09/24 23:28:13 yS0 init chat timed out, trying force-init-chat
> 09/24 23:28:13 yS0 send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d]
> 09/24 23:28:17 yS0 waiting for ``OK''
> 09/24 23:28:17 yS0 got: [10][03]+++[0d]ATQ0V1H0[0d]
> 09/24 23:28:36 ##### failed dev=ttyS0, pid=3890, got signal 15,
> exiting
> ----------------------------------------------------------------
>
> takole pa zgelda mgetty.config :
> port ttyS0
> modem-type data
> rings 1
> login-prompt This is modem port \L of @\r\n\nPlease login:\040
> init-chat "" ATZ OK
> # ----- global section -----
> #
> # In this section, you put the global defaults, per-port stuff is below
>
> # set the global debug level to "5" (which is quite verbose)
> debug 5
>
> # which fax number to transmit to the receiving station
> fax-id +31 50 363 6686
>
> # access the modem(s) with 38400 bps
> speed
> 38400
>
> # the /dev/tty-device is owned by uucp.uucp and mode "rw-rw-r--" (664)
> # Following the manual, I use the default (660)
> port-owner uucp
> port-group uucp
> #port-mode
> 0660
>
> # incoming faxes are owned by "root.uucp" and mode "rw-r-----" (640)
> # I use the default (640)
> fax-owner root
> fax-group uucp
> #fax-mode 0640
>
> #port ttyS0
> # rings 1
> # login-prompt This is modem port \L of @\r\n\nPlease login:\040
> # init-chat "" ATZ OK
> # notify root
> # modem-type cls2
> # switchbd
> 19200
>
> Pomoje je problem v tem ,da mgetty posilja AT komande v stilu >>send:
> ATZ[0d]<<, ali pa se motim. Kakorkoli, kaj mi je storiti, da odpravim
> tezavo.
>
> cu
S/MIME Cryptographic Signature
