Meni na FC 5 naredi takle rezultat - plata je VM266SE/LAN, nVidia
chipset, Athlon 2200+, hda je maxtor 60Gb, hdb je WD 200Gb, sda1 je pa
kljuc(ek 256Mb z FAT32.
[EMAIL PROTECTED] ~]# hdparm -tT /dev/hda /dev/hdb /dev/sda1
/dev/hda:
Timing cached reads: 1060 MB in 2.00 seconds = 529.64 MB/sec
Timing buffered disk reads: 144 MB in 3.00 seconds = 47.99 MB/sec
/dev/hdb:
Timing cached reads: 1000 MB in 2.00 seconds = 499.72 MB/sec
Timing buffered disk reads: 40 MB in 3.12 seconds = 12.83 MB/sec
/dev/sda1:
Timing cached reads: 1056 MB in 2.00 seconds = 527.71 MB/sec
Timing buffered disk reads: 4 MB in 4.15 seconds = 987.90 kB/sec
Stvar je po moje odvisna od vodila in ne od diska. Preglej torej kabel.
LP, Jože
Miha Pavlin je napisal(a):
router # hdparm -tT /dev/hda
/dev/hda:
Timing cached reads: 584 MB in 2.01 seconds = 291.17 MB/sec
Timing buffered disk reads: 68 MB in 3.01 seconds = 22.56 MB/sec
tole je rezultat....
sej pravim, sumljivo mi je , da je hitrost branja 2x manjša kot
hitrost pisanja
lp, Miha
_______________________________________________
lugos-list mailing list
lugos-list@lugos.si
http://liste2.lugos.si/cgi-bin/mailman/listinfo/lugos-list
_______________________________________________
lugos-list mailing list
lugos-list@lugos.si
http://liste2.lugos.si/cgi-bin/mailman/listinfo/lugos-list
