Hi Jody, I was talking to Lee earlier, and he doesn't remember being the source of complaints about the IOkit. I haven't run it myself so I have no complaints either ;)
What we did try last spring was to start obdecho and also obdfilter on an xt3 test cluster, using some info on the wiki. The first worked, but I couldn't get the second one going properly for more than one ost for reasons I now forget and may have been user error. Given the considerable difference in code base I'd say that's water under the bridge now. When the opportunity comes up again, I'll certainly try out the kit and give any feedback on the instructions. Thanks much, Ruth -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jody McIntyre Sent: Monday, November 27, 2006 4:28 PM To: Ward, Lee Cc: [email protected] Subject: Re: [Lustre-devel] wide striping Hi Lee, Peter Braam advises that you find our IOkit documentation inadequate. Would you please let me know what specific problems, uncertainties, or questions you have? The most up to date obdfilter_survey instructions can be found in section 1.2.2 of part III of the Lustre manual. Thanks, Jody _______________________________________________ Lustre-devel mailing list [email protected] https://mail.clusterfs.com/mailman/listinfo/lustre-devel _______________________________________________ Lustre-devel mailing list [email protected] https://mail.clusterfs.com/mailman/listinfo/lustre-devel
