Hi all!
I'm going to set up an active/active OST failover, but gets a litle
confused. In the manual in section 6.4.2 it says:
"To expand the simple two-node example, we add ost2 which is primary on
nodeB, and is on the LUNs nodeB:/dev/sdc1 and nodeA:/dev/sdd1. This is
to demonstrate the /dev/ identify can differ between nodes, but both
devices must map to the same physical LUN." Is this the same disc in a
SAN?
I want to have a local /dev/sdaX on each OST - with same size. That
means:
ost1 with its own /dev/sda3
in an active/active failover with
ost2 with its own /dev/sda3
Is this possible, or have I misunderstanded something?
--
Einar Gautun [EMAIL PROTECTED]
Statens kartverk | Norwegian Mapping Authority
3507 Hønefoss | NO-3507 Hønefoss, Norway
Ph +47 32118372 Fax +47 32118101 Mob +47 92692662
_______________________________________________
Lustre-discuss mailing list
[email protected]
https://mail.clusterfs.com/mailman/listinfo/lustre-discuss
