HI, I am using luster 1.8.5. Server s are up and mounted without any problem. But client failed to mount the luster file system. I also did not see luster in /proc/filesystems. Is there other rpm I needed to install on the client system?
The below is log from the client system: [root@localhost client]# rpm -ivh lustre-client-modules-1.8.5-2.6.18_194.17.1.el5_lustre.1.8.5.i686.rpm Preparing... ########################################### [100%] 1:lustre-client-modules ########################################### [100%] Congratulations on finishing your Lustre installation! To register your copy of Lustre and find out more about Lustre Support, Service, and Training offerings please visit http://www.sun.com/software/products/lustre/lustre_reg.jsp [root@localhost client]# rpm -qa | grep lustrelustre-client-modules-1.8.5-2.6.18_194.17.1.el5_lustre.1.8.5 [root@localhost client]# rpm -ivh lustre-client-1.8.5-2.6.18_194.17.1.el5_lustre.1.8.5.i686.rpm Preparing... ########################################### [100%] 1:lustre-client ########################################### [100%] [root@localhost client]# mount -t lustre 10.193.35.54@tcp0:/lustrefs /lustrefs mount.lustre: mount 10.193.35.54@tcp0:/lustrefs at /lustrefs failed: No such device Are the lustre modules loaded? Check /etc/modprobe.conf and /proc/filesystems Note 'alias lustre llite' should be removed from modprobe.conf [root@localhost client]# cat /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias scsi_hostadapter ahci options lnet networks=tcp [root@localhost client]# cat /proc/filesystems | grep -i lustre [root@localhost client]# rpm -qa | grep -i lustre lustre-client-modules-1.8.5-2.6.18_194.17.1.el5_lustre.1.8.5 lustre-client-1.8.5-2.6.18_194.17.1.el5_lustre.1.8.5
_______________________________________________ Lustre-discuss mailing list Lustre-discuss@lists.lustre.org http://lists.lustre.org/mailman/listinfo/lustre-discuss
