On 2013/10/16 4:45 PM, "Weilin Chang" <weilin.ch...@huawei.com> wrote:
>HI, > >I am using luster 1.8.5. Server s are up and mounted without any problem. >But client failed to mount the luster file system. I also did not see >luster in /proc/filesystems. Is there other rpm I needed to install on >the client system? The most important question is why are you starting with this very old 1.8.5 release from 3 years ago instead of a newer release like 2.1.6 or 2.4.1? You will definitely find better support for newer kernels with newer releases, as well as a better chance that someone will be able to fix your problem. My first guess is that your client network is not configured correctly, since it has a hostname of "localhost". Second guess is that the Lustre modules are not properly matched with your kernel and they are not loading at all. Cheers, Andreas > >The below is log from the client system: > >[root@localhost client]# rpm -ivh >lustre-client-modules-1.8.5-2.6.18_194.17.1.el5_lustre.1.8.5.i686.rpm >Preparing... ########################################### >[100%] > 1:lustre-client-modules ########################################### >[100%] >Congratulations on finishing your Lustre installation! To register >your copy of Lustre and find out more about Lustre Support, Service, >and Training offerings please visit > >http://www.sun.com/software/products/lustre/lustre_reg.jsp >[root@localhost client]# rpm -qa | grep >lustrelustre-client-modules-1.8.5-2.6.18_194.17.1.el5_lustre.1.8.5 >[root@localhost client]# rpm -ivh >lustre-client-1.8.5-2.6.18_194.17.1.el5_lustre.1.8.5.i686.rpm >Preparing... ########################################### >[100%] > 1:lustre-client ########################################### >[100%] >[root@localhost client]# mount -t lustre 10.193.35.54@tcp0:/lustrefs >/lustrefs >mount.lustre: mount 10.193.35.54@tcp0:/lustrefs at /lustrefs failed: No >such device >Are the lustre modules loaded? >Check /etc/modprobe.conf and /proc/filesystems >Note 'alias lustre llite' should be removed from modprobe.conf > > >[root@localhost client]# cat /etc/modprobe.conf >alias eth0 e1000e >alias eth1 e1000e >alias scsi_hostadapter ahci >options lnet networks=tcp > > >[root@localhost client]# cat /proc/filesystems | grep -i lustre > >[root@localhost client]# rpm -qa | grep -i lustre >lustre-client-modules-1.8.5-2.6.18_194.17.1.el5_lustre.1.8.5 >lustre-client-1.8.5-2.6.18_194.17.1.el5_lustre.1.8.5 > > > > Cheers, Andreas -- Andreas Dilger Lustre Software Architect Intel High Performance Data Division _______________________________________________ Lustre-discuss mailing list Lustre-discuss@lists.lustre.org http://lists.lustre.org/mailman/listinfo/lustre-discuss