upgrade your IS5600 firmware. We were seeing this till we upgraded to the latest NetApp firmware.
On Mon, Mar 28, 2016 at 10:30 PM, Ben Evans <bev...@cray.com> wrote: > You're getting multipathing errors, which means it's most likely not a > filesystem-level issue. See if you can get the logs from the storage array > as well, there might be some detail there as to what is happening. > > Can you check your logs and determine if it's a single connection that is > always failing? If so, can you try replacing the cable and see if that > clears it up? Next would be checking to make sure that the source and > destination SAS ports are good. > > -Ben Evans > > From: lustre-discuss <lustre-discuss-boun...@lists.lustre.org> on behalf of > Angelo Cavalcanti <acrribe...@gmail.com> > Date: Monday, March 28, 2016 at 10:01 AM > To: "lustre-discuss@lists.lustre.org" <lustre-discuss@lists.lustre.org> > Subject: [lustre-discuss] Error Lustre/multipath/storage > > Dear all, > > We're having trouble with a lustre 2.5.3 implementation. This is our setup: > > > One server for MGS/MDS/MDT. MDT is served from a raid-6 backed partition of > 2TB (que tipo de hd?) > > > Two OSS/OST in a active/active HA with pacemaker. Both are connected to a > storage via SAS. > > > One SGI Infinite Storage IS5600 with two raid-6 backed volume groups. Each > group has two volumes, each volume has 15TB capacity. > > > Volumes are recognized by OSSs as multipath devices, each voulme has 4 > paths. Volumes were created with a GPT partition table and a single > partition. > > > Volume partitions were then formatted as OSTs with the following command: > > > # mkfs.lustre --replace --reformat --ost --mkfsoptions=" -E > stride=128,stripe_width=1024" > --mountfsoptions="errors=remount-ro,extents,mballoc" --fsname=lustre1 > --mgsnode=10.149.0.153@o2ib1 --index=0 --servicenode=10.149.0.151@o2ib1 > --servicenode=10.149.0.152@o2ib1 > /dev/mapper/360080e500029eaec0000012656951fcap1 > > > Testing with bonnie++ in a client with the below command: > > $ ./bonnie++-1.03e/bonnie++ -m lustre1 -d /mnt/lustre -s 128G:1024k -n 0 -f > -b -u vhpc > > > No problem creating files inside the lustre mount point, but *rewriting* the > same files results in the errors below: > > > Mar 18 17:46:13 oss01 multipathd: 8:128: mark as failed > > Mar 18 17:46:13 oss01 multipathd: 360080e500029eaec0000012656951fca: > remaining active paths: 3 > > Mar 18 17:46:13 oss01 kernel: sd 1:0:0:0: [sdi] Unhandled error code > > Mar 18 17:46:13 oss01 kernel: sd 1:0:0:0: [sdi] Result: > hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK > > Mar 18 17:46:13 oss01 kernel: sd 1:0:0:0: [sdi] CDB: Read(10): 28 00 00 06 > d8 22 00 20 00 00 > > Mar 18 17:46:13 oss01 kernel: __ratelimit: 109 callbacks suppressed > > Mar 18 17:46:13 oss01 kernel: device-mapper: multipath: Failing path 8:128. > > Mar 18 17:46:13 oss01 kernel: sd 1:0:1:0: [sdm] Unhandled error code > > Mar 18 17:46:13 oss01 kernel: sd 1:0:1:0: [sdm] Result: > hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK > > Mar 18 17:46:13 oss01 kernel: sd 1:0:1:0: [sdm] CDB: Read(10): 28 00 00 07 > 18 22 00 18 00 00 > > Mar 18 17:46:13 oss01 kernel: device-mapper: multipath: Failing path 8:192. > > Mar 18 17:46:13 oss01 kernel: sd 1:0:1:0: [sdm] Unhandled error code > > Mar 18 17:46:13 oss01 kernel: sd 1:0:1:0: [sdm] Result: > hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK > > Mar 18 17:46:13 oss01 kernel: sd 1:0:1:0: [sdm] CDB: Read(10): 28 00 00 06 > d8 22 00 20 00 00 > > Mar 18 17:46:13 oss01 kernel: sd 0:0:1:0: [sde] Unhandled error code > > Mar 18 17:46:13 oss01 kernel: sd 0:0:1:0: [sde] Result: > hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK > > Mar 18 17:46:13 oss01 kernel: sd 0:0:1:0: [sde] CDB: Read(10): 28 00 00 07 > 18 22 00 18 00 00 > > Mar 18 17:46:13 oss01 kernel: device-mapper: multipath: Failing path 8:64. > > Mar 18 17:46:13 oss01 kernel: sd 0:0:0:0: [sda] Unhandled error code > > Mar 18 17:46:13 oss01 kernel: sd 0:0:0:0: [sda] Result: > hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK > > Mar 18 17:46:13 oss01 kernel: sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 07 > 18 22 00 18 00 00 > > Mar 18 17:46:13 oss01 kernel: device-mapper: multipath: Failing path 8:0. > > Mar 18 17:46:13 oss01 kernel: sd 0:0:0:0: [sda] Unhandled error code > > Mar 18 17:46:13 oss01 kernel: sd 0:0:0:0: [sda] Result: > hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK > > Mar 18 17:46:13 oss01 kernel: sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 06 > d8 22 00 20 00 00 > > Mar 18 17:46:14 oss01 multipathd: 360080e500029eaec0000012656951fca: sdi - > rdac checker reports path is up > > Mar 18 17:46:14 oss01 multipathd: 8:128: reinstated > > Mar 18 17:46:14 oss01 multipathd: 360080e500029eaec0000012656951fca: > remaining active paths: 4 > > Mar 18 17:46:14 oss01 kernel: sd 1:0:0:0: [sdi] Unhandled error code > > Mar 18 17:46:14 oss01 kernel: sd 1:0:0:0: [sdi] Result: > hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK > > Mar 18 17:46:14 oss01 kernel: sd 1:0:0:0: [sdi] CDB: Read(10): 28 00 00 07 > 18 22 00 18 00 00 > > Mar 18 17:46:14 oss01 kernel: device-mapper: multipath: Failing path 8:128. > > Mar 18 17:46:14 oss01 kernel: sd 1:0:0:0: [sdi] Unhandled error code > > Mar 18 17:46:14 oss01 kernel: sd 1:0:0:0: [sdi] Result: > hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK > > Mar 18 17:46:14 oss01 kernel: sd 1:0:0:0: [sdi] CDB: Read(10): 28 00 00 06 > d8 22 00 20 00 00 > > Mar 18 17:46:14 oss01 multipathd: 8:128: mark as failed > > Mar 18 17:46:14 oss01 multipathd: 360080e500029eaec0000012656951fca: > remaining active paths: 3 > > Mar 18 17:46:14 oss01 multipathd: 8:192: mark as failed > > Mar 18 17:46:14 oss01 multipathd: 360080e500029eaec0000012656951fca: > remaining active paths: 2 > > Mar 18 17:46:14 oss01 multipathd: 8:0: mark as failed > > Mar 18 17:46:14 oss01 multipathd: 360080e500029eaec0000012656951fca: > remaining active paths: 1 > > Mar 18 17:46:14 oss01 multipathd: 8:64: mark as failed > > Mar 18 17:46:14 oss01 multipathd: 360080e500029eaec0000012656951fca: > Entering recovery mode: max_retries=30 > > Mar 18 17:46:14 oss01 multipathd: 360080e500029eaec0000012656951fca: > remaining active paths: 0 > > Mar 18 17:46:14 oss01 multipathd: 360080e500029eaec0000012656951fca: > Entering recovery mode: max_retries=30 > > Mar 18 17:46:19 oss01 multipathd: 360080e500029eaec0000012656951fca: sdi - > rdac checker reports path is up > > > Multipath configuration ( /etc/multipath.conf ) is below, and is correct > according to the vendor (SGI). > > > defaults { > > user_friendly_names no > > } > > > blacklist { > > wwid "*" > > } > > > blacklist_exceptions { > > wwid "360080e500029eaec0000012656951fca" > > wwid "360080e500029eaec0000012956951fcb" > > wwid "360080e500029eaec0000012c56951fcb" > > wwid "360080e500029eaec0000012f56951fcb" > > } > > > devices { > > device { > > vendor "SGI" > > product "IS.*" > > product_blacklist "Universal Xport" > > getuid_callout "/lib/udev/scsi_id --whitelisted > --device=/dev/%n" > > prio "rdac" > > features "2 pg_init_retries 50" > > hardware_handler "1 rdac" > > path_grouping_policy "group_by_prio" > > failback "immediate" > > rr_weight "uniform" > > no_path_retry 30 > > retain_attached_hw_handler "yes" > > detect_prio "yes" > > #rr_min_io 1000 > > path_checker "rdac" > > #selector "round-robin 0" > > #polling_interval 10 > > } > > } > > > > multipaths { > > multipath { > > wwid "360080e500029eaec0000012656951fca" > > } > > multipath { > > wwid "360080e500029eaec0000012956951fcb" > > } > > multipath { > > wwid "360080e500029eaec0000012c56951fcb" > > } > > multipath { > > wwid "360080e500029eaec0000012f56951fcb" > > } > > } > > > Many many combinations of OST formating options were tried, internal and > external journaling … But the same errors persist. > > > The same bonnie++ tests were repeated on all volumes of the storage using > only ext4, all successful. > > > Regards, > > Angelo > > > _______________________________________________ > lustre-discuss mailing list > lustre-discuss@lists.lustre.org > http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org > -- Dr Stuart Midgley sdm...@sdm900.com _______________________________________________ lustre-discuss mailing list lustre-discuss@lists.lustre.org http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org