Thanks very much for your reply. I used Lustre 2.9.0 and ran “lctl lfsck_start -M lustre-MDT0000 -A -t all -r” to start LFSCK.
Could you brief me more about the slowness? I mean scanning around 300K inodes should not take that much time (80mins). These files were just created using a script after a fresh build of the lustre (no complex metadata operations at all). Got it, so the 30-sec interval is just for checking the status of the MDT. Another question is, for layout checking, does lfsck need to compare metadata stored in MDT (in LayoutEA) and metadata stored in OSTs (FID in LMA? not very sure) for orphan objects? When are these metadata gathered into one place for checking? I am asking this because previously I thought the periodically queries from OSTs to MDT are doing this job. Thanks, - Dong > On May 1, 2018, at 9:49 PM, Yong, Fan <fan.y...@intel.com> wrote: > > Inline comments. > > -- > Cheers, > Nasf > > >> -----Original Message----- >> From: lustre-discuss [mailto:lustre-discuss-boun...@lists.lustre.org] On >> Behalf >> Of 代栋 >> Sent: Wednesday, May 2, 2018 5:36 AM >> To: lustre-discuss@lists.lustre.org >> Subject: [lustre-discuss] Is there a way to have faster lustre file system >> checker >> (lfsck)? >> >> Hi all, >> >> I am still new to Lustre, so please let me know if I should send this >> message to >> devel-list. >> >> This week, I tried to run LFSCK over a very small cluster configuration (1 >> mdt and >> 3 osts). In this Lustre, I used about 300K inodes. It took me about 80 mins >> to finish a LFSCK run. And, more importantly, while I am running LFSCK, on >> both MDT and OSTS, the CPU utilization is 100%, taken by the lfsck thread. > > Which version of Lustre and what is the LFSCK command line you used? > > >> I understand that lfsck is operating in an online mode, so it is slow. But, >> I am >> wondering is there any way to accelerate this? Especially if I am allowed >> to run >> it offline, for example, during weekly maintenance. > > Your slow is abnormal, not related with online. The LFSCK can NOT be run > under offline mode. > > >> >> After checking the lfsck kernel logs, I noticed that in the phase2 scanning >> on >> OSTs, there is an 30 seconds interval between querying the MDTs. I am >> wondering is there any reason to have this 30 seconds interval, and will >> lfsck on >> OSTs be faster if we remove such 30 seconds interval? > > Normally, the master engine on the MDT will notify the LFSCK engine on the > OST when the first phase done. But we can NOT guarantee that the LFSCK engine > on the MDT always alive during the LFSCK (may because of some failure, or > network trouble, or node crash, and so on), so in the 2nd phase scanning, if > the LFSCK engine on the OST does not receive the notification from the MDT, > it needs to query the LFSCK (on the MDT) status periodically. If the MDT > finished the 1st phase scanning earlier than OST, then there will be no such > query. Anyway, such query is NOT the reason of your slow LFSCK. > > >> >> Thanks, >> - Dong >> _______________________________________________ >> lustre-discuss mailing list >> lustre-discuss@lists.lustre.org >> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org _______________________________________________ lustre-discuss mailing list lustre-discuss@lists.lustre.org http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
