On Wed, 12 Sep 2007, David Coulson wrote: > I've configured IPVS with a port-zero UDP service -
people don't use port 0 a whole lot. This means to forward all ports. Can you use something more restrictive, like only the ports you're interested in (even using a fwmark to group a few ports together). I wouldn't expect anyone has looked at the port 0 code for years. It may have bit rot. Certainly no-one's going to test it to see if it still works. As well there are problems load balancing UDP. Make sure your setup doesn't have any of the problems listed in the HOWTO. Joe -- Joseph Mack NA3T EME(B,D), FM05lw North Carolina jmack (at) wm7d (dot) net - azimuthal equidistant map generator at http://www.wm7d.net/azproj.shtml Homepage http://www.austintek.com/ It's GNU/Linux! _______________________________________________ LinuxVirtualServer.org mailing list - [email protected] Send requests to [EMAIL PROTECTED] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
