On Sun, 2 Dec 2007, NIels Heetesonne wrote: > Hello, > > I'm trying to setup a LVS-DR envirioment but am not yet succesfull. > > I've got the network setup as descibed below: >
ascii art survives better if < 60chars or so > > 192.168.2.238 | 192.168.2.239 | virtual ip: > 192.168.2.240/192.168.2.241/192.168.2.242 > -------------- -------------- > | | | | > | lvs-01 | | lvs-02 | > | | | | > -------------- -------------- > 10.0.0.1 | 10.0.0.2 | virtual ip: 10.0.0.254 there should be no VIP on the RIP network. What is VIP=10.0.0.254 about? > ------------------------------------------------------------- > | | | | > 10.0.1.1 | 10.0.1.2 | 10.0.2.1 | 10.0.2.2 | > -------------- -------------- -------------- -------------- > | | | | | | | | > | www-01 | | www-02 | | mail-01 | | mail-02 | > | | | | | | | | > -------------- -------------- -------------- -------------- > > I can't seem to find an howto as to accomplish this. the mini-HOWTO should point you in the right direction. Have you set up the LVS-DR example there? > The howto's I've found so far all asume that the lvs and > realserver are one, one what? > or the lvs and realserver are on the > same subnet. the RIPs and DIP have to be on the same subnet. Joe -- Joseph Mack NA3T EME(B,D), FM05lw North Carolina jmack (at) wm7d (dot) net - azimuthal equidistant map generator at http://www.wm7d.net/azproj.shtml Homepage http://www.austintek.com/ It's GNU/Linux! _______________________________________________ LinuxVirtualServer.org mailing list - [email protected] Send requests to [EMAIL PROTECTED] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
