-------- Original Message -------- Subject: Re: [lvs-users] question about LVS From: Michael Schwartzkopff <[email protected]> To: LinuxVirtualServer.org users mailing list. <[email protected]> Date: 05/03/2010 02:34 PM
> Am Montag, 3. Mai 2010 14:31:32 schrieb Michiel van Es: >> So to get it right: >> >> On the director: >> >>>> net.ipv4.ip_forward = 1 >> >> On the real servers: >> >>>> net.ipv4.conf.all.arp_ignore = 1 >> >>>> net.ipv4.conf.eth0.arp_ignore = 1 >> >>>> net.ipv4.conf.all.arp_announce = 2 >> >>>> net.ipv4.conf.eth0.arp_announce = 2 >> >> No forwarding on the real servers right? > > Correct Thanks. I still got the same results: I only connect to server2 and never to server1, also 1 of the 2 times I get a 'No route to host': mich...@wmichiele:~$ telnet 194.145.200.87 25 Trying 194.145.200.87... Connected to 194.145.200.87. Escape character is '^]'. 220 PCIntelligence mailserver 2 - mx2.pcintelligence.nl ESMTP quit 221 PCIntelligence mailserver 2 - mx2.pcintelligence.nl Connection closed by foreign host. mich...@wmichiele:~$ telnet 194.145.200.87 25 Trying 194.145.200.87... telnet: Unable to connect to remote host: No route to host mich...@wmichiele:~$ telnet 194.145.200.87 25 Trying 194.145.200.87... Connected to 194.145.200.87. Escape character is '^]'. 220 PCIntelligence mailserver 2 - mx2.pcintelligence.nl ESMTP quit 221 PCIntelligence mailserver 2 - mx2.pcintelligence.nl Connection closed by foreign host. mich...@wmichiele:~$ telnet 194.145.200.87 25 Trying 194.145.200.87... telnet: Unable to connect to remote host: No route to host > _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - [email protected] Send requests to [email protected] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
