Dear Hatt Tom, see http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.LVS-DR.html docu sample for keepalived as LB : www.keepalived.org/pdf/UserGuide.pdf docu sample for ldirectord as LB : http://www.tomvernon.co.uk/blog/2012/03/load-balanced-linux-web-cluster/
For real Productive Internet Services i wuold suggeest don´t use rfc1912 addresses at LVS-DR and realservers with LVS-DR. see page : http://www.ultramonkey.org/papers/lvs_tutorial/html Figure 2: LVS Direct Routing In some words : An Traffik-requestor ( end user with webbrowser i.e ) request to open i.e www.test.org at his PC That page have IP 217.145.96.131 as it sample ( VIP ) IP The LB´s( 2 or more servers) manage the Virtual IP(VIP ) , IPVS kernel table been managed by keepalived or ldirectord . Thus , the traffik that reach the VIP been redirected from the LB´s IPVS to realserver using arp discover ( some allowed to correct my wording here .. :-) ) Real servers must be configured to accept traffic for the virtual server's IP address ( configured at lo:? , noarp usage at kernel) Then the realserver directly answer to the traffik requestor. see page : http://www.ultramonkey.org/papers/lvs_tutorial/html Figure 2: LVS Direct Routing There are more DR configuration variants with i.e fwmark . Depends on your network setup ( i.e behind an filewall, NAT Router or others ) My own HOME Cluster setup are use rfc1912 , i am BEHIND an NAT Router have only one Public IPv4 but an dynamic class /48 IPV6 as well. Sutch apply with strange behavios ( i.e arp issues ) some times . -- Mit freundlichen Grüßen / Best Regards Horst Venzke ; PGP NET : 1024G/082F2E6D ; http://www.remsnet.de Legal Notice: This transmittal and/or attachments may be privileged or confidential. It is intended solely for the addressee named above. Any review, dissemination, or copying is strictly prohibited. If you received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Thank you. > Gesendet: Mittwoch, 01. Januar 2014 um 15:30 Uhr > Von: "Hatt Tom" <[email protected]> > An: "LinuxVirtualServer.org users mailing list." > <[email protected]> > Betreff: Re: [lvs-users] How does the director server connect with eah real > server ? > > thanks for reply ! > > Actually I meaned the DR mode , The document says that the Load > balancer will transfer user's packets to realserver , > then realserver will reply directly to user after processing the packets . > > my question is how does the real server reply directly to users ? > does real server have public ip ? > > > > > > > > 2014/1/1 Horst Venzke-Fa Remsnet Ltd <[email protected]>: > > Hello Hatt Tom, > > > > That depends on what LVS Mode you use. > > > > at LVS DR , the LVS Director ( aka "LB") the LB and realservers are > > allmost the same network . > > default Route of realservers to network´s default route > > > > at LVS NAT , the LVS Director ( aka "LB") realservers are not at the same > > network , > > LB are in Front of the Realservers. > > default Route of realservers to LB ´s NAT network. > > > > see http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/ > > > > > > -- > > Mit freundlichen Grüßen / Best Regards > > > > Horst Venzke ; PGP NET : 1024G/082F2E6D ; http://www.remsnet.de > > > > Legal Notice: This transmittal and/or attachments may be privileged or > > confidential. It is intended solely for the addressee named above. Any > > review, dissemination, or copying is strictly prohibited. If you received > > this transmittal in error, please notify us immediately by reply and > > immediately delete this message and all its attachments. Thank you. > > > > > >> Gesendet: Mittwoch, 01. Januar 2014 um 14:45 Uhr > >> Von: "Hatt Tom" <[email protected]> > >> An: "LinuxVirtualServer.org users mailing list." > >> <[email protected]> > >> Betreff: [lvs-users] How does the director server connect with eah real > >> server ? > >> > >> Does director server and real server working in on LAN ? > >> If so , could I consider the director server as on route of the LAN ? > >> Does it has many network interfaces to connect with several real > >> servers ? > >> > >> > >> > >> -- > >> Best Regards! > >> > >> _______________________________________________ > >> Please read the documentation before posting - it's available at: > >> http://www.linuxvirtualserver.org/ > >> > >> LinuxVirtualServer.org mailing list - [email protected] > >> Send requests to [email protected] > >> or go to http://lists.graemef.net/mailman/listinfo/lvs-users > >> > > _______________________________________________ > > Please read the documentation before posting - it's available at: > > http://www.linuxvirtualserver.org/ > > > > LinuxVirtualServer.org mailing list - [email protected] > > Send requests to [email protected] > > or go to http://lists.graemef.net/mailman/listinfo/lvs-users > > > > -- > Best Regards! > > _______________________________________________ > Please read the documentation before posting - it's available at: > http://www.linuxvirtualserver.org/ > > LinuxVirtualServer.org mailing list - [email protected] > Send requests to [email protected] > or go to http://lists.graemef.net/mailman/listinfo/lvs-users >
<<attachment: addressbook.vcf>>
_______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - [email protected] Send requests to [email protected] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
