thanks for reply!
I know it could work in nat mode,but I want to know why it does not work in dr mode? I have done some test, and find the director just refuse any request to VIP ,without routing to real server .what is the reason? 在 2014-4-26，14:03，Julian Anastasov <j...@ssi.bg> 写道： > > Hello, > > On Sun, 20 Apr 2014, Hatt Tom wrote: > >> hi: >> >> I am trying to construct a lvs on my host to schedule different >> process listening on different tcp port . >> >> Here is the shell to config director : >> >> VIP=192.168.1.118 >> 8 RIP1=192.168.1.116 >> 9 RIP2=192.168.1.117 >> 10 PORT=8088 >> 11 # >> 12 case "$1" in >> 13 start) >> 14 /sbin/ifconfig eth0:1 $VIP broadcast $VIP netmask 255.255.255.255 up >> 15 /sbin/route add -host $VIP dev eth0:1 >> 16 # Since this is the Director we must be able to forward packets >> 17 echo 1 > /proc/sys/net/ipv4/ip_forward >> 18 # Clear all iptables rules. >> 19 /sbin/iptables -F >> 20 # Reset iptables counters. >> 21 /sbin/iptables -Z >> 22 # Clear all ipvsadm rules/services. >> 23 /sbin/ipvsadm -C >> 24 # Add an IP virtual service for VIP >> 25 # In this recipe, we will use the round-robin scheduling method. >> 26 # In production, however, you should use a weighted, dynamic >> scheduling method. >> 27 /sbin/ipvsadm -A -t $VIP:8088 -s rr >> 28 # Now direct packets for this VIP to >> 29 # the real server IP (RIP) inside the cluster >> 30 /sbin/ipvsadm -a -t $VIP:8088 -r $RIP1 -g -w 1 >> 31 /sbin/ipvsadm -a -t $VIP:8088 -r $RIP2 -g -w 2 > > -g does not change IP addresses and ports, > so -m (for DNAT) would be needed. DNAT to local > RIP:RPORT should work on 2.6.37 and up. > >> 32 /bin/touch /var/lock/subsys/ipvsadm &> /dev/null >> >> After I configure the director , the real server has not received >> any routed packet from director >> >> where haveI token a mistake? > > Regards > > -- > Julian Anastasov <j...@ssi.bg> _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org Send requests to lvs-users-requ...@linuxvirtualserver.org or go to http://lists.graemef.net/mailman/listinfo/lvs-users
