add some information:
my kernal and release of lvs are taobao's,
optimization params:
net.ipv4.ip_forward=1
net.nf_conntrack_max = 25000000
net.netfilter.nf_conntrack_max = 25000000
net.netfilter.nf_conntrack_tcp_timeout_established = 1500
net.ipv4.tcp_max_tw_buckets = 6000
net.ipv4.tcp_sack = 1
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_rmem = 4096 87380 4194304
net.ipv4.tcp_wmem = 4096 16384 4194304
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.core.netdev_max_backlog = 262144
net.core.somaxconn = 262144
net.ipv4.tcp_max_orphans = 3276800
net.ipv4.tcp_max_syn_backlog = 262144
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 1
net.ipv4.tcp_syn_retries = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_fin_timeout = 100
net.ipv4.tcp_keepalive_time = 30
net.ipv4.ip_local_port_range = 1024 65000
net.ipv4.route.flush = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.tcp_syncookies = 0
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv4.tcp_max_syn_backlog = 819200
net.ipv4.tcp_synack_retries = 1
net.ipv4.tcp_max_tw_buckets = 819200
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
net.core.netdev_max_backlog = 500000
net.ipv4.ip_forward=1
net.ipv4.tcp_tw_recyle=1
net.ipv4.tcp_tw_reuse=1
net.ipv4.tcp_max_syn_backlog=8192
net.ipv4.tcp_keepalive_time=1800
net.ipv4.tcp_fin_timeout=30
net.core.rmem_max=16777216
net.core.wmem_max=16777216
net.ipv4.tcp_rmem=4096 87380 16777216
net.ipv4.tcp_wmem=4096 65536 16777216
net.core.netdev_max_backlog=3000
ipvs
ipvsadm -ln：
IP Virtual Server version 1.2.1 (size=4194304)
ipvs route:
[root@10.153.72.18 ~]# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4194304)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 20.0.0.1 rr
-> 10.153.72.2:80 Route 100 0 0
-> 10.153.74.84:80 Route 100 0 0
-> 10.153.74.85:80 Route 100 0 0
-> 10.153.74.139:80 Route 100 0 0
-> 10.153.74.140:80 Route 100 0 0
-> 10.153.74.141:80 Route 100 0 0
-> 10.153.74.142:80 Route 100 0 0
-> 10.153.74.248:80 Route 100 0 0
-> 10.153.74.249:80 Route 100 0 0
-> 10.153.74.250:80 Route 100 0 0
-> 10.153.74.251:80 Route 100 0 0
ipvs config:
[root@10.153.72.18 ~]# cat /etc/keepalived/119.188.143.208-80.conf
virtual_server_group http {
20.0.0.1 80
}
virtual_server group http {
delay_loop 7
lb_algo rr
lb_kind DR
protocol TCP
//syn_proxy
laddr_group_name laddr_g1
alpha //open alpha module, automatic bind vip
omega //open omega module,automatci unbind vip
quorum 1
hysteresis 0
quorum_up "ip addr add 20.0.0.1/32 dev eth0;"
quorum_down "ip addr del 20.0.0.1/32 dev eth0;"
include 20.0.0.1-80~10.153.74.85-80.conf
include 20.0.0.1-80~10.153.74.84-80.conf
include 20.0.0.1-80~10.153.74.139-80.conf
include 20.0.0.1-80~10.153.74.140-80.conf
include 20.0.0.1-80~10.153.74.141-80.conf
include 20.0.0.1-80~10.153.74.142-80.conf
include 20.0.0.1-80~10.153.74.248-80.conf
include 20.0.0.1-80~10.153.74.249-80.conf
include 20.0.0.1-80~10.153.74.250-80.conf
include 20.0.0.1-80~10.153.74.251-80.conf
include 20.0.0.1-80~10.153.72.2-80.conf
}
for each realserver file, contents of file is same:
real_server 10.153.74.250 80 {
weight 100
inhibit_on_failure
HTTP_GET {
url {
path /index.html
status_code 200
}
connect_timeout 3
nb_get_retry 2
delay_before_retry 5
}
}
在 2014-07-09 11:10:20，"胡西宁" <huxin...@yeah.net> 写道：
>hi everyone:
> I do test throughput of lvs server, the mode is dr. Num of lvs server is
> only one. test tool is jmeter, when throughput more than 20,000， It's not
> increase, I do not know what is the reason, I optimization params of kernal,
> include limits of open file, tcp connection. etc, thank you
>_______________________________________________
>Please read the documentation before posting - it's available at:
>http://www.linuxvirtualserver.org/
>
>LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org
>Send requests to lvs-users-requ...@linuxvirtualserver.org
>or go to http://lists.graemef.net/mailman/listinfo/lvs-users
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org
Send requests to lvs-users-requ...@linuxvirtualserver.org
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
