Hi, I've run LVS/NAT several times, always successful, right now faced problem: ip_vs is active, but all incoming packets are facing INPUT/director server interface instead of being forwarded to realservers.
serial_no = 29 primary = 123.123.123.251 service = lvs backup_active = 0 backup = 0.0.0.0 heartbeat = 1 heartbeat_port = 539 keepalive = 6 deadtime = 18 network = nat nat_router = 172.16.112.251 br5:1 nat_nmask = 255.255.255.0 debug_level = 7 monitor_links = 0 syncdaemon = 0 syncd_iface = br1 syncd_id = 0 virtual web2_80 { active = 1 address = 80.92.177.252 br1:1 vip_nmask = 255.255.255.240 port = 80 persistent = 100 use_regex = 0 load_monitor = none scheduler = rr protocol = tcp timeout = 15 reentry = 12 quiesce_server = 1 server web2b { address = 172.16.112.52 active = 1 port = 80 weight = 50 } } kernel net.ipv4.conf.*.forwarding all set to 1 [root@node1 ~]# ipvsadm -L -n IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 123.123.123.252:80 rr persistent 100 -> 172.16.112.52:80 Masq 50 0 0 only difference i see in current configuration - bridged interfaces Centos 6 I don't even know what and where to check and debug, everything should work... *George Machitidze* _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org Send requests to lvs-users-requ...@linuxvirtualserver.org or go to http://lists.graemef.net/mailman/listinfo/lvs-users