The second part is not correct because always my task have the control and another task never enter. can i use the select option? with TCP connection and another idea to listen about three socket and blocking while there isn´t data?
Thanks again Oscar On Tue, Sep 8, 2009 at 7:59 PM, Oscar F <[email protected]> wrote: > I know more data about the application. The connection is TCP, and i have > to open 6 socket, all of them unidirectional , 3 for request and 3 for > response. > Logical links connection sequence > > logical links connection process shall be initiated by the PC unit: it will > connect sequentially (one after the other) all the logical links. > > At power-on/reset, the EVK1100 application shall first create the sockets > in order to be ready for accepting a connection in all of them. > > > my first question is the function accept is blocking the code, because i´ll > do of this way > > > -createsockets( ) (the six socket) > > -bind( ) the six socket > > -listen ( ) the six socket > > > and then > > do { > > > -accept ( ) for socket one > > if the answer is OK > > -accept () for the second one > > if the answer is OK > > ... > > -accept () for the six one > > if the answer is OK then fin=true > > > > }while (fin) > > > > is that correct? > > > the next step is listen for 3 socket to request and this is my idea: > > > > do{ > > > if recv(socke1) > > { > > //process > > > } > > > if recv(socket2) > > { > > //process > > > } > > > > if recv(socket3) > > { > > //process > > > } > > > > }while (fin2) > > > is a good idea? > > > thanks for all > > Oscar > >
_______________________________________________ lwip-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/lwip-users
