On Tue, 2010-04-20 at 20:19 +0800, yueyue papa wrote: > windows server: 192.168.8.94 > GPRS module: 117.136.8.162 > > I like the GPRS module TCP/IP behavior, It send as much data as > possible without wait remote ACK.
Where is lwIP in all this? If one end is windows, and the other end has behaviour you like, which bit is the problem? > My lwIP unable to create such result: my lwIP could only send no more > than 2 TCP segment, and then wait ACK. The network delay will cause > performance down. Can you point at packets in the capture you sent that that illustrate this? > I like to make lwIP send as much as possible. Is it possible to > configure for this result? Your problem is not just a simple change in configuration, from what I saw in that packet capture, as explained in the earlier message, there appears to be something wrong with timing. > You refered not continuous to send is due to server congestion > algorithm, but I use the same sever, I could see the TCP segment send > as much as possible. The packet capture provided does not show congestion as being a limiting factor. Kieran _______________________________________________ lwip-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/lwip-users
