Interruptions are a method of available devices and including processes for the CPU to note the appearance of some circumstances requiring intervention. Thus, the devices can cause the CPU to stop by the time the job he was doing and attend to the interruption. Once served, will continue his previous work. When there were no interruptions, it was the processor that had to be continuously checking the status of the device when needed. All this time the processor was probing the state of devices was no time could be devoted to other processes, which does this mean in terms of performance. For these reasons. thought it best that there was a hotline between the processor and the devices, which devices to the processor indicated they were ready. When the processor comes a break, leaving the care of it right to do what he was doing.
2011/9/8 Kyle Sweet <[email protected]> > Hi Marcos, > > Thanks for the prompt feedback! > > I'm unclear about what it means to do this by INTERRUPTION. Can you please > explain? > > Thanks > > Kyle > > ----- Original Message ----- > From: "Marcos Guerra Medina" <[email protected]> > To: "Mailing list for lwIP users" <[email protected]> > Sent: Thursday, September 8, 2011 4:30:35 PM > Subject: Re: [lwip-users] LwIP Support - sethostaddr > > > I think it is best done by disruptions to close the socket and start with a > new connection and the new IP you want. > As to whether it can do When you want, yes, as long as this by > INTERRUPTION. Greetings. > > > 2011/9/8 Kyle Sweet < [email protected] > > > > Hello, > > I'm seeking support for using Lwip. I'm not sure if this is the best way to > ask a question - if not, could someone please help me direct my question? > > Here goes: > > I am using LwIP on a Blackfin DSP from Analog Devices. I'm using UDP with > static IP addressing and no DHCP. But I want to be able to change the IP > address on the fly. I'm trying to use sethostaddr() to accomplish this. I > have a few specific questions: > > 1) Can I just call sethostaddr() at any time, wihtout having to completely > re-initialize the TCP/IP stack? > 2) Would I then be running with the new IP Address? > 3) If I have open sockets, would I need to close them first and re-open new > sockets with the new IP address? > 4) Is there anything else I need to know about changing IP address in an > LwIP application? > > Hope to hear back from you! > > Cheers, > Kyle > > _______________________________________________ > lwip-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/lwip-users > > > _______________________________________________ > lwip-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/lwip-users > > _______________________________________________ > lwip-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/lwip-users >
_______________________________________________ lwip-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/lwip-users
