Hi, I have not worked with 107 but I did work with 207/407 etc...
As far as I remember I had no real problems switching from Lwip 1.32 to 1.41 Simply try to create a project that is working with 1.32 and replace all the LwIP files with the ones from 1.41 Start with this and see if it works for you. Good luck, Noam. ________________________________________ From: [email protected] <[email protected]> on behalf of oscargomezf <[email protected]> Sent: Monday, January 18, 2016 4:15 PM To: [email protected] Subject: Re: [lwip-users] LwIP V1.3.2 + FreeRTOS V8.2.1 + STM32F107 strange failure Hi Sergio, First of all, thank you very much for trying to help me. I can use one UART for debugging, but I don't know how to tell to LwIp that the UART 1 is the one I want to use for debugging. I'm using LwIP v1.3.2 because I can't find how to port LwIP v1.4.1 for using with SMT32F107. I found an example of LwIP v1.3.1 working with ST32F107 + FreeRTOS v8.2, and It was very easy for me to port from LwIP v1.3.1 to v1.3.2. Do you know where can I find the LwIP v1.4.1 ready to work with the STM32F107? Best regards. -- View this message in context: http://lwip.100.n7.nabble.com/LwIP-V1-3-2-FreeRTOS-V8-2-1-STM32F107-strange-failure-tp25571p25597.html Sent from the lwip-users mailing list archive at Nabble.com. _______________________________________________ lwip-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/lwip-users _______________________________________________ lwip-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/lwip-users
