Thanks I was wondering about the "Link Status" but was not sure if you had to try and auto negotiate first.
Thanks again Trampas On Wed, Dec 11, 2019 at 5:14 PM Sergey A. Borshch via Mailing list for lwIP users <lwip-users@nongnu.org> wrote: > On 11.12.2019 23:55, Trampas Stern wrote: > > This is not directly LWIP related but I was wondering if there was a way > to > > detect when cable is unplugged through a GMII/RMII interface? > basic status register (index 1), bit 2. > > > > Specifically my hardware does not have the carrier sense pin connected > to > > microcontroller and I was wondering if there was a way to poll the > GMII/RMII > > registers to see when a cable is connected or not? > > > > I did not see anything in the documentation right off but thought I > would ask, > > as maybe I am not looking at the correct registers. > > > > Thanks > > Trampas > > > > _______________________________________________ > > lwip-users mailing list > > lwip-users@nongnu.org > > https://lists.nongnu.org/mailman/listinfo/lwip-users > > > > --- > Regards, Sergey > > > > _______________________________________________ > lwip-users mailing list > lwip-users@nongnu.org > https://lists.nongnu.org/mailman/listinfo/lwip-users
_______________________________________________ lwip-users mailing list lwip-users@nongnu.org https://lists.nongnu.org/mailman/listinfo/lwip-users