Hi all, I have a project, and I noticed a while back that it would repeatedly repeat its DHCP request.
Yesterday I had intended to solve this and also do some other maintenance on the code. I started with the latter and... the DHCP problem disappeared. However, this morning it had started again. Now you might say: it is supposed to re-validate the DHCP lease every now and then. And I'd agree. However multiple times a second is WAY too much. I have now reverted the board to more stock "example" code: Way less of my code in there. But it seems that now the problem only happens after a while. This is running on an RP2040 with hardwired ethernet through a lan8720 PHY. Anybody seen such behaviour? What was the problem then? Why would LWIP restart the DHCP sequence? What could cause this? Where would I look to find the code responsible? Roger. -- ** r.e.wo...@bitwizard.nl ** https://www.BitWizard.nl/ ** +31-15-2049110 ** ** Delftechpark 11 2628 XJ Delft, The Netherlands. KVK: 27239233 ** f equals m times a. When your f is steady, and your m is going down your a is going up. -- Chris Hadfield about flying up the space shuttle. _______________________________________________ lwip-users mailing list lwip-users@nongnu.org https://lists.nongnu.org/mailman/listinfo/lwip-users