In case some one comes upon this via a google search with the same problem in the future.
The iptable rules shown do work The problem was a small typo I missed in one of them. -Kevin > On Mar 10, 2016, at 6:53 PM, Kevin LaTona <li...@studiosola.com> wrote: > > I jus tried installing 15.10 on a 3 different test servers with LXD 2.0.0.rc2. > > The ip tables rules I had been using with 14.04 would not work. > > Here is an example: > > iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 8080 -j DNAT > --to-destination 10.0.3.250:8080 > iptables -A FORWARD -p tcp -d 10.0.3.250 --dport 8080 -m state --state > NEW,ESTABLISHED,RELATED -j ACCEPT > iptables -t nat -A OUTPUT -p tcp -o lo --dport 8080 -j DNAT --to-destination > 10.0.3.250:8080 > > In the past I have used these iptable rules to allow outside of the local lan > access to a container when needed. > > > Curious is anyone else running into this issue with 15.10? > > If so, what did you do to allow outside public access to a container? > > > Since I jumped from 14.04 + LXD 0.9 to 1510 2.0.0.rc2 in my testing and it > broke. > > I have no idea if there is new or better way that has been introduced since > 0.9 when needing direct public access to a container while using the default > lxcbr0 bridge + 10.0.3.x DHCP setup. > > > > I ended up rolling back to 15.04 for now and it’s all back to working as it > was in 14.04. > > > Thanks for any thoughts or insights? > > -Kevin > _______________________________________________ > lxc-users mailing list > lxc-users@lists.linuxcontainers.org > http://lists.linuxcontainers.org/listinfo/lxc-users _______________________________________________ lxc-users mailing list lxc-users@lists.linuxcontainers.org http://lists.linuxcontainers.org/listinfo/lxc-users