Thank you Fajar, I have tried putting entries in /etc/network/interfaces on an Ubuntu host but they are completely ignored. Well that is not completely true, static IPs can be set for eth0 but bridge entries and wlan0 entries are ignored The only success I have had is creating bridge interface files using systemd-networkd in /etc/systemd/network. I don't really understand why.

Sent from my Windows Phone
------------------------------------------------------------------------
From:Fajar A. Nugraha <mailto:[email protected]>
Sent:‎3/‎14/‎2016 4:17 PM
To:LXC users mailing-list <mailto:[email protected]>
Subject:Re: [lxc-users] [Solved]RE: Networking LXD containers

On Tue, Mar 15, 2016 at 4:21 AM, Steve Adams <[email protected]> wrote:
 Problem solved. Turns out the problem was that I was routing 10.0.0.0/16
 traffic to 10.0.1.1 dev lxcbr0 (the IP of lxcbr0). Changed route via
10.0.1.80 ( IP of the veth iface) and worked perfectly. Hopefully this
helps
 someone else.
Also could someone tell me how LXD sets up the bridge so that Network
 Manager does not screw with it. I am experimenting on a laptop and would
 rather not disable NM as I am usually connected via wifi. I have
 experimented with setting up custom interfaces with some success but NM
 seems to come through and mess them up.

On ubuntu/debian, if an interface (e.g. eth0) has an entry on
/etc/network/interfaces, NM will leave it alone. On redhat, NM should
ignore devices with NM_CONTROLLED="no".

As to "how lxd setup bridge", try /usr/lib/x86_64-linux-gnu/lxc/lxc-net

--
Fajar
_______________________________________________
lxc-users mailing list
[email protected]
http://lists.linuxcontainers.org/listinfo/lxc-users

Reply via email to