There is no lxc-profile command, and lxc-ls and lxc-info don't list anything about a profile. I have no idea if that means anything.
Michael On 10/20/2016 01:53 PM, McDonagh, Ed wrote: > > It will be the new lxc software, but without the niceness of the lxd > interface. > > > > Hence all his commands being lxc-command instead of lxc command > > > > *From:*lxc-users [mailto:lxc-users-boun...@lists.linuxcontainers.org] > *On Behalf Of *Ron Kelley > *Sent:* 20 October 2016 18:51 > *To:* LXC users mailing-list > *Subject:* Re: [lxc-users] LXC containers w/ static IPs work on some > hosts, not on others > > > > hmmm, seems you are running the “original” version of lxc and not the > new lxc/lxd software. Please ignore my comments then… > > > > > > On Oct 20, 2016, at 1:47 PM, Michael Peek <p...@nimbios.org > <mailto:p...@nimbios.org>> wrote: > > > > # lxc profile show > The program 'lxc' is currently not installed. You can install it by > typing: > apt install lxd-client > > Maybe that's part of the problem? Am I missing a package? Here are > the packages I have installed for lxc: > > # dpkg -l | grep lxc | cut -c1-20 > ii liblxc1 > ii lxc > ii lxc-common > ii lxc-templates > ii lxc1 > ii lxcfs > ii python3-lxc > > Michael > > On 10/20/2016 01:43 PM, Ron Kelley wrote: > > "lxc profile show”. Usually, you have a default profile that gets > applied to your container unless you have created a new/custom > profile. > > > > > > > > > > > > On Oct 20, 2016, at 1:41 PM, Michael Peek <p...@nimbios.org > <mailto:p...@nimbios.org>> wrote: > > > > How do I tell? > > Michael > > > > On 10/20/2016 01:35 PM, Ron Kelley wrote: > > What profile(s) are you using for your LXC containers? > > > > > > > > On Oct 20, 2016, at 1:33 PM, Michael Peek <p...@nimbios.org > <mailto:p...@nimbios.org>> wrote: > > > > Hi gurus, > > I'm scratching my head again. I'm using the following > commands to create an LXC container with a static IP address: > > # lxc-create -n my-container-1 -t download -- -d ubuntu -r > xenial -a amd64 > > # vi /var/lib/lxc/my-container-1/config > > Change: > # Network configuration > # lxc.network.type = veth > # lxc.network.link = lxcbr0 > # lxc.network.flags = up > # lxc.network.hwaddr = 00:16:3e:0d:ec:13 > lxc.network.type = macvlan > lxc.network.link = eno1 > > # vi /var/lib/lxc/my-container-1/rootfs/etc/network/interfaces > > Change: > #iface eth0 inet dhcp > iface eth0 inet static > address xxx.xxx.xxx.4 > netmask 255.255.255.0 > network xxx.xxx.xxx.0 > broadcast xxx.xxx.xxx.255 > gateway xxx.xxx.xxx.1 > dns-nameservers xxx.xxx.0.66 xxx.xxx.128.66 8.8.8.8 > dns-search my.domain > > # lxc-start -n my-container-1 -d > > > It failed to work. I reviewed my notes from past posts to the > list but found no discrepancies. So I deleted the container > and tried it on another host -- and it worked. Next I deleted > that container and went back to the first host, and it > failed. Lastly, I tried the above steps on multiple hosts and > found that it works fine on some hosts, but not on others, and > I have no idea why. On hosts where this fails there are no > error messages, but the container can't access the network, > and nothing on the network can access the container. > > Is there some step that I'm missing? > > Thanks for any help, > > Michael Peek > > _______________________________________________ > lxc-users mailing list > lxc-users@lists.linuxcontainers.org > <mailto:lxc-users@lists.linuxcontainers.org> > http://lists.linuxcontainers.org/listinfo/lxc-users > > > > > > > _______________________________________________ > > lxc-users mailing list > > lxc-users@lists.linuxcontainers.org > <mailto:lxc-users@lists.linuxcontainers.org> > > http://lists.linuxcontainers.org/listinfo/lxc-users > > > > _______________________________________________ > lxc-users mailing list > lxc-users@lists.linuxcontainers.org > <mailto:lxc-users@lists.linuxcontainers.org> > http://lists.linuxcontainers.org/listinfo/lxc-users > > > > > > > _______________________________________________ > > lxc-users mailing list > > lxc-users@lists.linuxcontainers.org > <mailto:lxc-users@lists.linuxcontainers.org> > > http://lists.linuxcontainers.org/listinfo/lxc-users > > > > _______________________________________________ > lxc-users mailing list > lxc-users@lists.linuxcontainers.org > <mailto:lxc-users@lists.linuxcontainers.org> > http://lists.linuxcontainers.org/listinfo/lxc-users > > > > ------------------------------------------------------------------------ > *Attention: * > *This e-mail and any attachment is for authorised use by the intended > recipient(s) only. It may contain proprietary, confidential and/or > privileged information and should not be copied, disclosed, > distributed, retained or used by any other party. If you are not an > intended recipient please notify the sender immediately and delete > this e-mail (including attachments and copies). > The statements and opinions expressed in this e-mail are those of the > author and do not necessarily reflect those of the Royal Marsden NHS > Foundation Trust. The Trust does not take any responsibility for the > statements and opinions of the author. > Website: http://www.royalmarsden.nhs.uk > * > ------------------------------------------------------------------------ > > > _______________________________________________ > lxc-users mailing list > lxc-users@lists.linuxcontainers.org > http://lists.linuxcontainers.org/listinfo/lxc-users
_______________________________________________ lxc-users mailing list lxc-users@lists.linuxcontainers.org http://lists.linuxcontainers.org/listinfo/lxc-users