Dnia 2011-07-10, nie o godzinie 19:59 +0100, Mayur Gowda pisze: > Hello All, > > > As planned I got 10GbE interfaces(with linux TOE) on my server(long > wait...!!) and got two debian containers up with following > configuration: > > > >Set macvlan on the 10GbE physical interface > sudo ip link add link eth0 address 00:00:00:ab:00:01 macvlan0 > type macvlan mode bridge > > > > Setup containers with macvlan > lxc.network.type = macvlan > lxc.network.macvlan.mode = bridge > lxc.network.link = eth0 > The containers can ping eachother but the problem is they are no way near the > 10gig mark (throughput IPERF < 1Mbps). Am I missing any configuration here? > my goal is to bridge the containers @ 10gig using macvlan. The veth bridging > yields 2.8Gbps ,with MTU tweak, but thats the maximum I can get to. Need your > expertise on pushing the rates ! > > Thanks & Regards > Mayur
Hi, I'm not able to provide any hints on macvlan, but have you tried disabling Netfilter calls on your bridge with veth? The control files should be in /proc/sys/net/bridge - turning some of them off might improve performance if you haven't done so already, I think. ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 _______________________________________________ Lxc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/lxc-users
