The message below from "Thomas E. Dickey"
<[EMAIL PROTECTED]> was forwarded by the
moderator.
>On Thu, 5 Oct 2000, Horst Drechsel wrote:
>
> > Hi all,
> >
> > we are running OpenVMS 7.2-1 / TCPIP 5.0A on a Compaq alpha workstation
> > cluster.
> >
> > trying to install LYNX 2.8.3 with the VMS install script BUILD.COM
> > failed with an error occurring, because the logical
> >
> > UCX$C_IOCTL (nor is TCPIP$C_IOCTL)
>
>that's not a logical, but a symbol which is expected to be defined in
>a header file - for the UCX configuration. Perhaps that is no longer
>defined (my understanding is that everyone has UCX), or you have installed
>another configuration such as MultiNet.
>
>I built a copy of 2.8.3pre.1 in March, on an OpenVMS 6.2 (VAX) using UCX.
>That works for me.
>
> > is not defined (happens during compilation of
> >
> > [lynx.www.library.implementation]httcp.c)
> >
> > Therefore the library [lynx.www.library.implementation]WWWlib_UCX.OLB is
> > not built correctly. I guess that's the reason that invoking lynx.exe
> > returns the following error:
> >
> > MELMAC> r lynx
> > %SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual
> address=000000000000
> > 0000, PC=0000000000000000, PS=0000001B
> > %TRACE-F-TRACEBACK, symbolic stack dump follows
> > image module routine line rel PC abs PC
> > 0 0000000000000000
> 0000000000000000
> > LYNX LYMAIN main 27900 0000000000000A54
> 0000000000117EF4
> > LYNX LYMAIN __main 0 0000000000000070
> 0000000000117510
> > 0 FFFFFFFF84B5F3F4
> FFFFFFFF84B5F3F4
> >
> >
> > Has anyone using VMS experienced the same error? Thanks for hints.
> >
> > Greetings,
> > Horst
> >
> >
> > --
> >
> ****************************************************************************
> > Horst Drechsel
> > Dr. Remeis
> Observatory [EMAIL PROTECTED]
> > Astronomical Institute Phone:
> +49-951-95222-15
> > University Erlangen-Nuernberg Fax:
> +49-951-95222-22
> > Sternwartstr.7, D-96049 Bamberg, Germany
> >
> ****************************************************************************
> >
> > ; To UNSUBSCRIBE: Send "unsubscribe lynx-dev" to [EMAIL PROTECTED]
> >
>
>--
>T.E.Dickey <[EMAIL PROTECTED]>
>http://dickey.his.com
>ftp://dickey.his.com
; To UNSUBSCRIBE: Send "unsubscribe lynx-dev" to [EMAIL PROTECTED]
