On Sat, Jan 19, 2002 at 06:37:36PM -0800, Doug Kaufman wrote: > On Sat, 19 Jan 2002, Neo Sze Wee wrote: > > > Is it really that easy? I am using an English system. > > > > I can only use the console and I prefer to use console. I do not have X and I > > have only install the minimal. My sytem is 486 with 4 ram and run slowly. So > > I have to install the samllest and the minimal. > > > You didn't give us the information we need to really help, but from
Using slackware 8.0 but kernel 2.0.34 on 486 pc with 4 RAM connecting to the net through ppp with lynx 2.8.3. > the above, I presume that you are running a DOS system, since Windows > is unlikely to run on a 486 with 4 Meg of RAM. If so, I don't know if > you are using a DOS port to lynx, or connecting to a unix ISP with > lynx running under unix. In either case, you need to set your machine > up to be able to read Chinese. For DOS, this is generally done with > the program "ZWDOS". I would suggest downloading that program and > seeing if it works on your system. It is generally available from the > IFCSS Chinese Software Archive, but that site and most of its mirrors > are down. The current version is 3.0. It is currently available from: > "http://ftp.ccu.edu.tw/pub/chinese/dos/zwdos/"; > > Other sofware that may be of interest to you is listed on the IFCSS web > site, but may not be readily available. > "http://www.ifcss.org/links/software/cnapps/doscsys.html"; I will check out. > > If you are not running DOS, please send the list details about your > system, and someone may be able to help. Yes I also have DOS on the same system and it would be nice to know your ways of doing things. > Doug > __ > Doug Kaufman > Internet: [EMAIL PROTECTED] --g0KGMcQ00051.1011543797/slackware.example.net-- ; To UNSUBSCRIBE: Send "unsubscribe lynx-dev" to [EMAIL PROTECTED]
