Hi Everybody!
I'm a new Lyx! user and I think that it's one of the best program ever.
Congratulations Lyx team!
Currently I'm writing all my stuff in lyx, but I have a little problem:
Everytime I try to insert a figure, lyx crashes... :-(
Here goes XFree86 log file:
-------------------------------------------------------------------------------
XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: December 29 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.35 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225,
sis5597, sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b,
tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
mgag100, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301,
ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge,
AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160,
NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2x00, p9100, spc8110, generic
(using VT number 7)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "es"
(**) Mouse: type: Mouseman, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3, Chorded middle button
(**) SVGA: Graphics device ID: "Matrox Mystique"
(**) SVGA: Monitor ID: "My Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: Matrox MGA 1064SG rev 3, Memory @ 0xee000000, 0xef000000, MMIO @
0xefffc000
(--) SVGA: Linear framebuffer at 0xEE000000
(--) SVGA: MMIO registers at 0xEFFFC000
(--) SVGA: Video BIOS info block at 0x000c77e0
(--) SVGA: Found and verified enhanced Video BIOS info block
Using BIOS value for maxPixelClock: 220000 kHz
(--) SVGA: chipset: mga1064sg
(--) SVGA: videoram: 4096k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 220.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 44.900
(**) SVGA: Mode "800x600": mode clock = 36.000
(**) SVGA: Mode "640x480": mode clock = 25.180
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
(--) SVGA: XAA: Dashed lines and segments
lyx: SIGSEGV signal caught
Sorry, you have found a bug in LyX. If possible, please read 'Known bugs'
under the Help menu and then send us a full bug report. Thanks!
lyx: Attempting to save document /root/newfile.lyx as...
1) /root/newfile.lyx.emergency
Save seems successful. Phew.
Bye.
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 3 (X_GetWindowAttributes)
Resource id in failed request: 0xc0007d
Serial number of failed request: 9
Current serial number in output stream: 10
waiting for X server to shut down
-------------------------------------------------------------------------------
My linux system is Slackware 3.6 with lyx 1.0.4
Please, if someone know how to fix the problem... let us know!
Regards from Chile..
"MS Windows, brings the power of yesterday computers today"
Rodrigo Gesswein P. : [EMAIL PROTECTED]
ICQ # : 22795888
