I have now managed to configure it properly. I think the problem was that
I had installed a minimum installation of RH 6.2 (I only have a 0.8GB HD to
use) and so I had missed some files needed. A reinstallation did the
trick.
Thanks very much for all your help.
'til next time!
Tom.
----- Original Message -----
From: Jean-Marc Lasgouttes <[EMAIL PROTECTED]>
To: Tom Beale <[EMAIL PROTECTED]>
Cc: Lyx Group <[EMAIL PROTECTED]>
Sent: Friday, October 13, 2000 9:40 AM
Subject: Re: Re[2]: Configuring Lyx
> >>>>> "Tom" == Tom Beale <[EMAIL PROTECTED]> writes:
>
> Tom> I have installed Xforms from there RPM files - I thought I only
> Tom> had to do that if I ran make myself - sorry I'm a beginner so I
> Tom> get a bit confused.
>
> Tom> I have got a forms.h file, and I have tried compiling using
> Tom> --with-extra-libraries=/usr/..../forms.h but with no luck
>
> OK, let's try the hard way :) Could you post (1) the configure command
> line you've tried (for example, the one above is really wrong %-), and
> (2) the file config.log after running configure (remove config.cache
> before running configure).
>
> JMarc
>
