On Tue, Feb 27, 2018, 10:03 PM Scott Kostyshak <skost...@lyx.org> wrote:
> On Wed, Feb 28, 2018 at 12:46:49AM +0000, Eric Barkan wrote: > > Sorry, Scott. I first sent this to your own email by mistake. Re-sending > to > > the list. > > No problem, thanks for resending. > > > I've installed and run the latest 2.3.0 installer from the FTP site on > > Windows 10. > > > > I've done 2 installations, both against TexLive 2017: > > > > 1. Windows 10 running natively on a new Dell laptop with Kaby Lake > Xeon. > > > > 2. Windows 10 under Virtual box on a Fedora 27 host. > > > > No problems or errors at all, either during installation, lyx program > > startup, or compiling the User Guide. The generated User Guide PDF > looks OK > > as far as I can tell. > 噢噢噢噢o > Good to know. > > > Yes, that's French, not Spanish. > > If you go to that line, and then go to Edit > Language, French should > appear with a check mark. I think the reason why the Spanish error comes > up is from the line just below it, which is in Spanish. > > > After clicking "Show Output Anyway" the PDF compiles without further > error > > and the affected lines in Section 3.9.2 appear normal. > > > > > > Am I missing some package from Texlive? > > Do you have "babel-spanish" installed? > > > Hope this helps. In any case, thanks to you all for your hard work on > this > > release! > > Thank you, Eric. This is all very helpful! I appreciate your testing and > detailed feedback. > > Scott >
