Well now that the cable version is stable I've got a couple directions I
could go. One direction was Bluetooth and the other was to add an email
client. But I'm not sure how viable an email client is when connect to a
phone that already gets email.
With most of the bluetooth devices I've seen, I would need to hard wire
CTS/RTS and DTR/DSR. But since the TPDD protocol is packet based, I
don't think that would be a problem. The only issue I see is with delays
but newdos and teeny would allow me to get around it. That still doesn't
offer a solution for anybody with a 200 or NEC, or with the
Sardine/Ultimate ROM loading the RAM versions.
My biggest concern is the adapters themselves. I still have to have a 9
to 25 converter and then I have to power it. How much interest is there
in Bluetooth? I'll do it if it's going to be helpful.
Kurt
On 2/22/2016 7:05 PM, Stephen Adolph wrote:
Any thoughts on adding the bluetooth serial port support into mcomm?
..Steve
On Mon, Feb 22, 2016 at 9:06 PM, Willard Goosey <goo...@sdc.org> wrote:
Works great! Samsung Gakaxy Tab 2 7" Android 4.2.2
Willard
Sent from Samsung tablet
-------- Original message --------
From Kurt McCullum <kurt.mccul...@att.net>
Date: 02/21/2016 9:44 PM (GMT-07:00)
To Model 100 Discussion <m100@lists.bitchin100.com>
Subject [M100] mComm for Android Version 1
Just wanted to let everybody know that Version 1 of mComm is finally up.
Thanks to everyone who tested the beta and gave me feedback.
Kurt