I had it at one point.  I know where the modem cable is, but there's a big box 
of 'odd cables' ....(a BIG box).  Have one for a Marantz tape recorder but I 
think it is a different number of pins on the DIN....

[email protected]
________________________________________
Från: M100 [[email protected]] för Peter Vollan 
[[email protected]]
Skickat: den 10 februari 2018 08:54
Till: [email protected]
Ämne: Re: [M100] digital audio recorders en lieu of cassette recorders?
https://webmail.slu.se/owa/?ae=PreFormAction&t=IPM.Note&a=Reply&id=RgAAAAAboYyqI29AQJCJ6tm5HraQBwA8KbAfWCBTTp%2buHv1%2fPywxADAzaj%2fsAACcik1G3gZCSpTI6ZxrzTWMAALyK3%2biAAAJ#
You mean to tell me that you do not have a cassette cable?!


On 9 February 2018 at 23:39, Jonathan Yuen <[email protected]> wrote:
> Hi,
>
> I have a Zoom H4 that I use for music, but I haven't tested it.  I'll try but 
> I'm not sure where my cable for the M100 is.  I think there is an empty DIN 
> plug floating around some where so I'll have to get out the soldering 
> iron.....
>
> Jonathan
>
> [email protected]
> ________________________________________
> Från: M100 [[email protected]] för megarat [[email protected]]
> Skickat: den 9 februari 2018 19:27
> Till: [email protected]
> Ämne: [M100] digital audio recorders en lieu of cassette recorders?
>
> Good morning.  I'm curious about what work has been done with using digital 
> equipment to save/load "cassette-based" files?  Specifically, has anyone done 
> any work with those digital audio recorders used for dictation, recording 
> meetings, etc?
>
> The main reason why I ask is that I've always been under the impression that 
> the "remote" signal was required for the M100 to proper save/write files to 
> cassette, and most (if not all?) of these modern digital audio recorders 
> don't have a remote input jack.
>
> While not as convenient as saving files with a TPDD emulator, it does seem 
> that having an archive of files saved as MP3 files (or equivalent) would be a 
> fun way to preserve and use this technology.
>
> Thanks,
> CAM

Reply via email to