Which one, the original or the Tindie version? I thought the Tindie version ( U$52.00`+ S ) is out of stock?
m ----- Original Message ----- From: Gregory McGill To: m...@bitchin100.com Sent: Thursday, April 16, 2020 2:40 PM Subject: Re: [M100] Video adapter. doh that's the one I ordered... will have to do a run of the other boards then :) and put it in my store when you get it all figured out I'll get that in motion On Thu, Apr 16, 2020 at 10:11 AM Stephen Adolph <twospru...@gmail.com> wrote: yes, I am basing this off the original design not the one on Tindie. The tindie design uses new firmware, and a faster clock. Not doing that work. On Thu, Apr 16, 2020 at 1:07 PM Mike Stein <mhs.st...@gmail.com> wrote: Hi Steve, Did it ultimately end up essentially identical to the original except for the DE-9? (The original board has a 4-pin low voltage TTL header). I ask because I have a few extra of the original board just in case someone wants to do it the hard way, assuming any firmware upgrades will be compatible. m ----- Original Message ----- From: Stephen Adolph To: m...@bitchin100.com Sent: Thursday, April 16, 2020 12:13 PM Subject: Re: [M100] Video adapter. regarding the kit. The kits available don't have a convenient RS-232 connector. I redesigned the PCB to support a DB-9 connector. If you can wait, I'll have that ready soon. If not, then I think you can go for Tindie ($$$) or the source that Geoff cites on his site. On Thu, Apr 16, 2020 at 12:06 PM Tom Wilson <wilso...@gmail.com> wrote: Where did you find it, Greg? I haven’t been able to find a kit. On Thu, Apr 16, 2020 at 7:36 AM Gregory McGill <arcadeshop...@gmail.com> wrote: agreed, super cool.. i just ordered one of these boards Greg On Thu, Apr 16, 2020 at 7:09 AM Brian White <b.kenyo...@gmail.com> wrote: this is really cool bkw On Thu, Apr 16, 2020, 8:47 AM Stephen Adolph <twospru...@gmail.com> wrote: next update: I have a beta version of the VT100 driver working now. It's pretty neat to have a modern display hanging off of the M100! The current version works with the "stock VT100 adapter" with a few issues. What needs to happen next is a software load for the VT100 adapter that provides a few extra commands that the M100 needs. The VT100 driver works just like Microsoft Disk Basic, in that it integrates with the M100 OS to enable direct access to an external CRT. cheers Steve On Tue, Apr 14, 2020 at 10:44 AM Stephen Adolph <twospru...@gmail.com> wrote: update: Towards the goal of a next-generation video solution for M100, I have some progress to share. Recall this thread where I suggest that the "Geoff VT100 adapter" as the hardware to focus on. First, I have a "beta" VT100 driver solution, which is closely based on Microsoft Disk-Basic (minus the disk stuff). While still buggy, I can now drive the VT100 board, and attached VGA monitor from BASIC. Secondly, in order to really support M100, the software component in the VT100 emulator board needs to be extended. I'm working on that. This does imply that the "Geoff VT100" board, as it was originally designed, won't work perfectly for M100. But, I'll post the updated software image so anyone with this board already can update their board. I'll keep posting updates as this progresses. Steve On Sun, Apr 5, 2020 at 8:41 AM Stephen Adolph <twospru...@gmail.com> wrote: As some of you may recall, it is fairly straightforward to access an 80x24 screen in CP/M through the use of the M100 serial port, and an external VT100 emulator. This device: http://geoffg.net/terminal.html is a great example of how to connect a modern VGA flat screen display to the M100. However, this exact design isn't really convenient, as the serial data has to be connected with a custom cable. (see the little white 4 pin header). I've decided to make a variant of this design that has a DB-9 connector on it, for serial data, so that it can be easily connected to the M100. I'll be making kits available for this design, and the price will be 30$ US. Hopefully by making this affordable and easier to connect, this can become the defacto solution to 80x24 display! This solution will work with CP/M right away, but the next task will be - how to use this solution with Model T natively. This will take some software work. A port of the "DVI software" to leverage serial communication to the VT100 adapter is one way to do this. This solution is also compatible with the "BCR serial port" modification which allows for serial data transmission at up to 120kbits/sec. A nice solution to exernal video that frees up the real RS-232 port of the laptop for comms. I'll be updating the REX wiki with some information on this. Kits aren't ready just yet. I'm waiting for my boards to arrive. cheers Steve -- Tom Wilson wilso...@gmail.com (619)940-6311 K6ABZ