Right!, Which they have in every direction and config you could want,
easy on amazon, ebay, aliexpress, even startec, lots of laces.
Then the kit is all very tidy.
--
bkw
On 7/13/20 6:08 PM, Gary Weber wrote:
Actually, I should say, Right-angle USB to mini-USB cable, about 2
inches long.
On Mon, Jul 13, 2020 at 2:48 PM Gary Weber <g...@web8201.com
<mailto:g...@web8201.com>> wrote:
Seems like a right-angle mini-usb connector would be just the
ticket for this.
On Mon, Jul 13, 2020 at 2:45 PM Brian K. White
<b.kenyo...@gmail.com <mailto:b.kenyo...@gmail.com>> wrote:
I added a version that might or might not be more acceptable
for NEC.
I have the pcb hanging down so the bottom edge of the pcb is
just above
the bottom corner of the laptop. That positions the usb cable
far enough
down that the very end of the molded boot is still below the
top edge of
the laptop. I don't know if this arrangement is the best, but
it was
easy to try and see, and doesn't interfere with either the
serial or
phone ports.
https://oshpark.com/shared_projects/pU895scG
--
bkw