Hot Dawg!

I have CP/M. I thought I was too old to get this excited, but here I am in M100 heaven.

The TSD100.BX I had was corrupted. Replaced from internet -- I was using what I had on another computer, and (bang) CP/M 2.2 is running on the M100 with TS-Dos and Super ROM.

Thank you so much, Jim and Steve for your help and another wonderful product.

God Bless,

GregS <><

On 7/26/20 9:53 PM, Greg Swallow wrote:


If I Power Cycle after the "hang" the M100 is at Cold Start (1/1/2000)


On 7/26/20 9:30 PM, Greg Swallow wrote:

Starting with a fresh (cold start) M100:

1.    Set DATE$, DAY$, and TIME$

2.    Using terminal program (moserial) to drop RXCINI.DO to M100

3.    Disconnect MoSerial and start LaddieAlpha

4.    From BASIC:
       RUN"RXCINI.DO

5.    Load REX Code:    YES
       Init REX Dir:            YES

        <ENTER>
        ... (y/n)? Y

6.    REXCPM INITIALIZE V1

         Loading at 62000 <... ...> 62879

            Action=19200, Load, Init
            Format:  XXXXXX
            Name:    RXC_11

7.    28672 Format:  XXXXXX
                    Name:    RXC_11
                    Initializing Directory ...
                    Complete!!

        Ok

8.    Cycle Power

9.    From BASIC:
        CALL 63012

10.  From MENU:
        RXCMGR

11.   RXCMGR 1.0 Group<TAB>ROM     free: 16

         Load:

12.   Loading from image file name:TSD100

13.    Cycle Power

14.    RXCMGR 1.0 Group<TAB>ROM   free: 15

            TSD100        -----------

15.    Highlight TSD100 and press ENTER

16.    Install ROM (Y/N)? Y

And she sits there

GregS <><

On 7/26/20 8:03 PM, Stephen Adolph wrote:
Not sure actually.  I dont recall what error that is.  Is this a rex error?

When you say you are trying to load it, exactly what are you doing?

And what are you doing to get the error?

Thx


On Sunday, July 26, 2020, Greg Swallow <gswal...@mchsi.com <mailto:gswal...@mchsi.com>> wrote:

    Jim/Steve,

    Got RXCMGR loaded and running. Used it to load TSD100 and SUP10,
    but both gave a "model mismatch" error when tryied to
    start/activate. Several reset/cold starts/re do and now stalls
    when try to activate TSD100. Have let M100 sit w/ no power,
    including memory, to be sure REXCPM is in "default state."

    Only thing I can think of is the system ROM is a modified M102
    Y2K chip. Also changed Microsoft (c) banner to serial number.

    Any idea?

    GregS <><

Reply via email to