that's what I have in my store https://www.arcadeshopper.com/wp/store/#!/Retro-Printer-Centronics-Printer-module-V3-raspberry-pi-or-equivalent-required/p/190216087/category=0
On Tue, Sep 27, 2022 at 4:39 PM Ken Gregg <ke...@acm.org> wrote: > > I use the Retro-Printer module (https://www.retroprinter.com/) attached > to a Raspberry Pi to print over a wired network to one of two modern laser > printers or one modern inkjet printer. You can also just send the output to > PDF files. From the computer's perspective, it emulates an old EPSON impact > printer. > > It takes some fiddling to get the module configured correctly for all the > printers you want to print to, but it works. > > I have successfully used it with a Tandy 102 and a TRS-80 Model I. > On 9/27/2022 4:16 PM, Will Senn wrote: > > Will the m100 work with pretty much any parallel port printer or does it > have to have a specific driver? What kinds or printers work with the m100 > these days? > > Will > >
