I make my own cables.
Including ones that allow you to select if the output is going to a MIC or 
LINE/AUX. It includes an impedance matching circuit consisting of two resistors 
and a capacitor. This effectively attenuates the signal to that of a 'condenser 
mic' when needed.
This advanced cable also has an audio isolation transformer which helps to 
eliminate noise between the m100 and the recording device.
I've only made three that have a Bluetooth connection so that you can transfer 
files to the m100. Recording from the m100 to a smart phone can be a problem 
depending on the phone. The phone must have the capability to record via a 
Bluetooth microphone.
________________________________
From: M100 <m100-boun...@lists.bitchin100.com> on behalf of Will Senn 
<will.s...@gmail.com>
Sent: Saturday, October 1, 2022 9:06 PM
To: m...@bitchin100.com <m...@bitchin100.com>
Subject: Re: [M100] Will any old Cassette recorder work?

Nice. Did you make your own cable or buy a premade one?

Sent from my iPhone

On Oct 1, 2022, at 4:01 PM, you got me 
<ven...@hotmail.com<mailto:ven...@hotmail.com>> wrote:

just about any audio recording device will work. However.....
some common problems are associated with recording a program (output of the 
computer). Ideally, the recorder should have a LINE INPUT for this. An AUX 
INPUT will usually do, but there will be an impedance mismatch when using a MIC 
INPUT. The LINE and AUX are designed for really strong signals. The MIC input 
is designed for weak, or unamplified signals. This is like taking a watermelon 
and trying to fit it into a shot glass. You might get lucky if your recording 
device allows you to manually set the recording level. Some units do this via 
the volume switch (effectively it serves two purposes). But some units don't 
have that feature.
I have been able to do program recordings and playbacks using mini cassettes, 
mini discs, a Tascam portable digital recorder, etc.
________________________________
From: M100 
<m100-boun...@lists.bitchin100.com<mailto:m100-boun...@lists.bitchin100.com>> 
on behalf of Will Senn <will.s...@gmail.com<mailto:will.s...@gmail.com>>
Sent: Saturday, October 1, 2022 8:21 PM
To: m...@bitchin100.com<mailto:m...@bitchin100.com> 
<m...@bitchin100.com<mailto:m...@bitchin100.com>>
Subject: [M100] Will any old Cassette recorder work?

Has anyone recently done tape stuff? What's your setup? I have a Califone 3230 
AV recorder with motor control, aux etc. Will that work, or would I need a 
Radio Shack branded setup?

Thanks,

Will

Reply via email to