Thanks. I believe you’re right because I feel like I pulled it off the board and there were no pins. I did solder the leads directly to the board. I guess now that I’ve replaced the battery and recapped the board there is really no reason to have a connector.
Sent from my iPhone > On Feb 18, 2023, at 01:50, Brian K. White <b.kenyo...@gmail.com> wrote: > > On 2/17/23 17:56, ho collo wrote: >> Looking at page 6-1 of the service manual for the Model 100 attempting to >> figure out the connector that goes from the AC jack to the main board. It >> has 3 pins to wires (orange, red, black). Does anyone know a replacement >> part # or the spacing so I can replace both the male and female connections? >> Thanks in advance. >> Ho. >> Sent from my iPhone > > I dont' think that is actually a removable connector. No male & female parts, > just a single "wire-to-board" part that's soldered to the board. > So you lose nothing by just soldering the wires directly. If you want to > replace it with a removable connector, I think the space is a bit constrained > for most 2.54mm 3-pin connectors. > > -- > bkw >