Great, thanks! I think I have one of your terminals somewhere but I also have several of Geoff's version from before you decided to make yours.
m On Sat, Feb 25, 2023 at 9:22 PM Stephen Adolph <twospru...@gmail.com> wrote: > > Oh! I see. Yes the mvt100 fiemware is compatible with the original > Geoff terminal hardware. > > > >>>>> On Saturday, February 25, 2023, Mike Stein <mhs.st...@gmail.com> >>>>> wrote: >>>>> You may have misunderstood my poorly worded question: can I upgrade >>>>> the firmware in Geoff's board with your VT100 version? >>>>> >>>>> m >>>>> >>>>> On Sat, Feb 25, 2023 at 7:08 PM Stephen Adolph <twospru...@gmail.com> >>>>> wrote: >>>>> no, the Geoff board uses the Geoff firmware. >>>>> Model 100 has some impossible-to-replicate escape codes that needs >>>>> some firmware on the terminal end to deal with. >>>>> >>>>> So, it will sorta work but not entirely, without the firmware I think >>>>> I have posted. >>>>> >>>>> >>>>> On Sat, Feb 25, 2023 at 6:57 PM Mike Stein <mhs.st...@gmail.com> >>>>> wrote: >>>>> While on the topic, can I assume that your updated MVT100 firmware >>>>> will work correctly in the original Geaoff Graham board? >>>>> >>>>> m >>>>> >>>>> On Sat, Feb 25, 2023 at 3:29 PM Stephen Adolph <twospru...@gmail.com> >>>>> wrote: >>>>> >>>>> >>>>> http://club100.org/memfiles/index.php?direction=&order=&directory=Steve%20Adolph/MVT100%20for%20PC&; >>>>> >>>>> I decided to post my hacked MVT100 windows application, for feedback. >>>>> >>>>> It works with this driver: >>>>> https://bitchin100.com/wiki/index.php?title=Integrated_VT100_driver >>>>> or REX#/REXCPM R2.1 or newer. >>>>> >>>>> Why: >>>>> Using a serial connection, this modified terminal application gives >>>>> you an 80x24 display using your PC. >>>>> Program is called VT52.exe, which is how it was named by the original >>>>> author. >>>>> Download and extract the executable from the link above, and configure >>>>> the serial interface. Connect your M100/T102 with the VT100 driver >>>>> installed, and connect to PC via serial cable. >>>>> >>>>> Status is "very beta". Feedback is appreciated. >>>>> >>>>> thx >>>>> Steve >>>>> >>>>> >>>>> >>>>> >>>>>
