Nice! On Sun, May 7, 2023, 6:46 AM <bir...@soigeneris.com> wrote:
> As I mentioned a few weeks ago I had been hunting for replacement FFC > cables for the T102 KB and LCD. Ones of the correct length and pitch are > available from Mouser, but the MOQ was 1,000 pieces! After a lot more > searching, I found some I could get in smaller quantities. The original > cables have an extra strip of 1/8” (3mm) plastic stuck to the back side of > each end to make it thick enough for the connector. After some more > searching I found some self-adhesive UMHW tape and painstakingly applied it > to both ends of each new cable, so they are direct replacement for the > original. > > > > Of course, the problem still remains that sometimes the connectors > themselves go bad and are much too tight and can damage a cable (new or > old). I’ll be testing some replacement connectors in the near future. > > The link to the cables on my website: > https://www.soigeneris.com/flat-flex-cables-ffc-for-t102 > > > > Jeff Birt > > (Hey Birt!) >
