On Sun, Nov 15, 2026 at 10:04 PM John R. Hogerhuis [email protected] <https://mailto:[email protected]> wrote:
> > On Sun, Nov 15, 2026 at 6:33 PM B9 <[email protected]> wrote: > >> >> I had never noticed it! It is less than 1kHz off, making the clock 0.03% >> fast. It takes nearly an hour to be off by one second. >> >> > Wow, that seems like a lot! A second every hour is 2.8 minutes a week. But > maybe no one ever relied on it, I guess. Why would you when you can just > call the Time Lady? > > I wonder if people just didn't use it or they set it a lot. > > Maybe a fun project, add an atomic radio sync to the Model 100 :-) > > -- John. > You’re right, that does seem like a lot. I think for me, perhaps it’s that I set it often. I often experiment with programs and accidentally cause a cold start, time-warping my Tandy 200 back to midnight, January 1st, 1900. I checked my second Tandy 200, and it shows f = 2.45836MHz. [image: f=2.45836MHz. An oscilloscope showing a square wave with a frequency measurement.] Name Measured MHz %err Nominal 2.4576 0.000 b9 T200 A 2.45841 0.033 b9 T200 B 2.45836 0.031 So my two machines are measuring nearly identically. I recalibrated my oscilloscope and got the same numbers. Did people treat time more casually back in the 1980s? Do crystals drift over time? Could there be some sort of wave propagation delay because I’m measuring it at the external system bus connector? —b9
