David Szasz <[email protected]> writes:

>    I have a model 100 that has been sitting in a closet for years. On
>    testing I found the ¢A¢ and ¢Z¢ keys (sitting adjacent) to be feeling a
>    little ¢funny¢ and not responding. On pressing them about 50 times I
>    find they are working now but still feel ¢mushy.¢ Can any list members
>    recommend a good key-cap puller? I see earlier list posts that talk
>    about key cleaning and repair but do not mention specific key-cap
>    pullers, or maybe I did not search enough? I suppose one of the wire
>    key-cap pullers would be best. Before any "surgery" I want to get the
>    best tools assembled and not break any plastic snaps. Thanks all.

I got a cheapo cap puller on amazon - can't remember the brand but
they're just resold aliexpress bulk orders I suspect. Before then i used
a screwdriver, which isn't advisable for most but I was gentle.

The keycap below is a simple tension fit top cap. If you use a tweazer
you can gently remove it. The internal mechanism is a silicon nipple
sitting inside. It's just sitting in there, so it's easy to remove with
the tweazers. A qtip with some alcohol rubbed in there ought to remove
the buildup.

You'll notice some silicon on the underside of the nipple. It leaves
residue over time.

If you need it, I'll provide a link to an inexpensive applicator that
will refresh the nipple if it's worn out. 'Tech Tangents' youtube
channel used it, which is how I know about it. I had a similar problem
with a recent M100 I got on ebay and the nipples were in good shape. Just
needed to clean the contacts better. My wife's eagle eyes somehow
noticed it. I thought I'd need to replace the whole switch but, that's
likely never necessary - now that I know the keycaps were rather janky
in design.

https://www.amazon.com/dp/B0DSBQSSB1/ref=sspa_dk_detail_5?th=1

-- 
Daniel
sysop  | air & wave bbs
finger | [email protected]

Reply via email to