Oh, ChatGPT is definitely helping me with this. I am more of a hardware
guy than a software guy. I may be able to do it, but it would take me
months, maybe years with my limited free time as an engineer.
I have gotten pretty good at directing ChatGPT to build complex programs
by giving it small tasks, lots of reference material, pointing it in the
right direction, checking it's work and lately by giving it controlled
access directly to hardware or in this case, the emulator. It can now
write code and run it and find it's own mistakes.
I have even been experimenting with teaching it to use some of my
instruments directly such as a logic analyzer for some automated reverse
engineering.
The printer port is bidirectional and that is exactly what I was
thinking. I can either design an adapter for PC communication, mass
storage, or even control a UART or bit-bang one. I have not decided the
direction just yet.
I was actually just about to toss the Model 100 references at it, since
it is beginning to stray a bit as you can see in the picture, it missed
the whole concept of the row/column slots in the main menu. I just had
to get it back on track and make sure it understands that we are
building an OS that has to follow fixed rules.
It is also only using one bank of flash right now which is why it thinks
there is only 16KB free. Will implement the bank-switching in the kernel
shortly. The CIDCO has 128KB of RAM in multiple banks of 16KB. The OS is
using one 16KB bank and the rest will be free for applications.
A faithful port would be interesting, but it would be a shame not to
utilize the advanced hardware. I am trying to keep it in my mind to
think like the original Model 100 Kyocera engineers and pretend this is
the next generation.
I want to put the most effort in the Word Processor because that was the
number one use for the Model 100 and that also is what most people seem
to have wanted to convert this into.
For me, I am targeting it as an Interactive Fiction player with the
possibility of supporting limited graphics. I experimented with this a
bit on the Model 100, but the screen resolution is just too limited for
what I wanted to do.
On 11/19/2026 5:06 PM, John R. Hogerhuis wrote:
Actually is the printer port bidirectional? Maybe just use that for
connectivity if so.
And as to software... it would be a massive project otherwise but a
coding agent could help you disassemble and decompile the model 100
rom to, say, Rust or some other language with guardrails and then
compile it to z80 code. Then adapt to the hardware.
Depends on what you want to do. If you're more interested in creating
something brand new but familiar UI wise that is cool too.
-- John