Ed,

Just what is this device?  It looks like an ordinary ethernet switch, but is 
this something that allows you to run ethernet through the electric?  I am not 
sure just what this does from the description on the Best Buy site.

John

 
On Mar 30, 2010, at 5:25 AM, Ed Wiser wrote:

> Here is what I used on my HD TV to connect it to the internet along with my 
> HD TiVo
> <http://www.bestbuy.com/site/Cisco+Linksys+-+Powerline+A/V+Ethernet+Adapter+Kit+with+4-Port+Ethernet+Switch/9010241.p?skuId=9010241&ci_src=14110944&ci_sku=9010241&ref=06&loc=01&id=1218008374585>
>  
> Cisco Linksys - Powerline A/V Ethernet Adapter Kit with 4-Port Ethernet 
> Switch works great gives you Ethernet where you need it. It took all of 10 
> minutes to install and it just works. Love it. I can stream movies and copy 
> shows off the TiVo fast now. No need for Wifi.  If you use a mixed Wifi 
> that’s B,N and G wireless cards the new dual channel models are great in that 
> you can have one for G and one for N signals.
>  
>  
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of David Harker
> Sent: Monday, March 29, 2010 8:36 PM
> To: Topics related to Apple and Macintosh computers
> Subject: Re: [MacGroup] Wireless troubleshooting
>  
> Jonathan brought up some very good points, nice job, Jon.
> 
> On 3/29/10, Jonathan Fletcher <[email protected]> wrote:
> On Mar 29, 2010, at 12:00 PM, Wendi Williams <[email protected]> wrote:
> 
> > I am trying to use wireless with my old G4 tower running Leopard, to no 
> > success. We have a Linksys wireless router, but we have been using ethernet 
> > with most of our computers. It works beautifully with the Tivo and my 
> > MacBook. I bought a used Airport card for the old G4. When I go to "About 
> > this Mac" it recognizes the card. It can see our network, but it cannot 
> > connect. It says that I may have the wrong password (no) or the wrong name 
> > for the network (no). We checked the password security. It is set to WPA 
> > personal on the router. We tried WPA versus WPA2, but no luck. We tried 
> > something called "Short GI" in the router settings, but again, no luck. 
> > Does anyone have any suggestions for something else I might try? Is it 
> > likely that this used airport card is no good?
> 
> Wendi, you likely have some incompatibilities with the card, machine and the 
> network. Some G4s would work and some not in your situation.
> 
> There is only one PowerMac G4 that ever would take an Airport Extreme card 
> and I don't think you will like what you're going to do to your network if 
> you get an earlier Airport card to work with it. You will lose a lot of speed 
> (for the other computers as well) and seriously cripple your ability to 
> secure your network.
> 
> Which Airport card did you get? Are you able to tell which G4 you have? 
> First, when you look at it does the front of the computer have shiny mirrored 
> optical drive doors on it? If they don't, it's not one of the right ones. If 
> it does have mirrored drive doors, then check the back to see if it has a 
> FireWire 800 port on it--an original one, not on an add-on card.
> 
> You can read more about how to tell them apart and see a picture of what a G4 
> FW 800 is supposed to look like on the back on this page:
> 
> <http://support.apple.com/kb/TA25585?viewlocale=en_US>
> 
> 
> If it is then you are likely to be ok, and can probably get it to work 
> reliably with your network.
> 
> If it doesn't, you have only a few practical options for that machine (in 
> order of preference):
> 
> 1. Invest in a sufficient length of ethernet cable
> 2. Buy a compatible "G" or "N" PCI card to install in it (research this one 
> carefully, or buy it somewhere where they have a liberal return policy)
> 3. Buy a second router or "wireless access point" and dedicate it to the G4 
> (although this will still compromise your network security)
> 
> If you find that you really have a "FireWire 800" G4 tower then let us know 
> and we can work some more to figure out a solution for you.
> 
> ::-)
> 
> j.
> 
> 
> --
> Jonathan Fletcher
> FileMaker 9 & 10 Certified Developer
> ****NEW Ph no: 502-509-7137****
> 
> Fletcher Data Consulting
> [email protected]
> 
> Kentuckiana's Only FileMaker Users Group:
> Listserv signup: http://fmpug.com/mailman/listinfo/louisville_fmpug.com
> Blog: http://kyfmp.com
> Next meeting 4/15/2010 1:00 pm
> Info & RSVP: http://fmpug.com/scheduleMeetings.php
> 
> 
> 
> _______________________________________________
> MacGroup mailing list
> [email protected]
> http://www.math.louisville.edu/mailman/listinfo/macgroup
> 
>  
> 
> _______________________________________________
> MacGroup mailing list
> [email protected]
> http://www.math.louisville.edu/mailman/listinfo/macgroup

_______________________________________________
MacGroup mailing list
[email protected]
http://www.math.louisville.edu/mailman/listinfo/macgroup

Reply via email to