Yes, I know it's an antique....A Beige G3 Tower, 233 Megahertz running system 
8.6....Yes I said System 8.6. 
But until yesterday it has been a good workhorse and used regularly since it 
was purchased brand new. So here's the problem... 

It does not complete the start-up process. After pushing the power button to 
start it, the computer begins the start-up process with the familiar tick,tick 
sounds of the self check but never give the start-up chime. The 3 green lights 
on the keyboard briefly light up and go off as they should. After a few seconds 
of ticking in the self check process it stops making any further start 
up-sounds and the monitor never connects to the computer and no initializations 
ever load. Also, the green power light within the on/off button on the front of 
the tower never lights up. After the ticks stop you can hear the fan humming in 
the tower, as if the computer had started up, but the monitor never connects 
and the system software never loads. You can stop the fan humming by pushing 
the on/off button on the tower. 

Here's what I've tried 

• Tried to start up with system disk and with disk warrior with no success. So 
probably not a software problem 

• Tried starting using both the start button on the Keyboard and power button 
on the front of the Tower. Both will begin the process, but has no effect on 
the outcome. 

* Tried resetting PRAM during several attempted start-ups. Unsuccessful...no 
Chimes ever heard 

• Checked all connections and tried a different power chord 

• Tried the reset button on motherboard. 

• Checked seating of memory sticks 

• Looked for any burn evidence on motherboard. None seen. 

So what is most likely the problem? 

Mother board failure? 
Hard drive failure? 
power supply problem? 
Would the PRAM battery have any effect on the situation? 
Something else???? 

Thanks for any input/help 
Leo Harrison 


_______________________________________________
MacGroup mailing list
[email protected]
http://www.math.louisville.edu/mailman/listinfo/macgroup

Reply via email to