All, Thanks for the input: Indeed it was a mechanical problem. I have a Delta Printer with parallel Poles (D=16) and the carriages do have teflon coated bearing bushes from GLACIER. One of the bushes came lose what was causing this nasty problem. I have changed the design to ball bearing bushes from INA. All is okay now.
On Sunday, 26 June 2016 07:24:53 UTC+2, Ryan Carlyle wrote: > > Looks like mechanical backlash. Note the infill lines not touching and > circles out of round. Does the crick in the straight line happen when one > of the carriages changes direction? That would be a dead give-away. Loose > joints (including joint mount bolts) can also cause this sort of thing, but > I'm betting on lost motion in one of the columns. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.