The error you are getting should not occur if ALL your files were upgraded
However I know nothing about the image you are trying to upgrade and
don't know if all the files are standard.
Look at /bin/configserver
It should have lines the same as these for its imports
https://github.com/machinekit/machinekit/blob/master/src/machinetalk/config-service/configserver.py#L16
Then check for
/usr/lib/python2.7/dist-packages/machinetalk/protobuf/message_pb2
I would think that one of the 2 is missing, it is either importing the
old module path, or the new path does not exist.
regards
On 10/07/16 23:38, 'IonicBasher' via Machinekit wrote:
Getting this error when trying to run Machineface on latest image both classic
machinekit and jessie.
Unsure of what that's about. Axis loads up fine with sample CRAMPS
configuration.
Followed this guide as usual:
https://github.com/the-snowwhite/CRAMPS2/wiki/BBB-CRAMPS-Machineface-3D-Printer-Out-Of-The-Box-Experience
Except with:
https://github.com/strahlex/MendelMax-CRAMPS
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
