On 8/12/2016 5:36 PM, Fede La Torre wrote: > Hi, yes here is the link https://github.com/fastbot3d
That's a lot of repositories! It will take me some time to sort through, particularly since I've got several other higher-priority tasks at the moment. > I hope there's some possibility for this board with machinekit, since it's > useless with the current firmware and there's no mo support from the staff, > although they keep selling boards... I'm sure the hardware will work with Machinekit, it's just a matter of getting the software (OS) running. If a "stock" RCN Debian image can be made to run on the BPP (this depends on how much they changed from the BeagleBone EEPROM, DDR memory timings, etc), it should be pretty easy to get Machinekit running. -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
