On 9/25/2016 4:35 AM, Mathias Giacomuzzi wrote: > Hello, > > I would like to add a tool length switch/sensor to my home made router. > First Question - which input pin should I use here? I use the CRAMPs cape. > Where can I found some information how to add one in general?
The easiest pins to use would probably be the limit switche inputs if you aren't using all 6. If you are, there are 4 I/O pins available on P503 (protected against 5V levels) and 3 I/O pins and an I2C interface available on P303 (tied directly to the BBB pins, so 3.3V only). Details of the CRAMPS board are collected on the RepRap wiki page: http://reprap.org/wiki/CRAMPS ...you probably want the schematic for the latest version: https://github.com/cdsteinkuehler/bobc_hardware/blob/CRAMPS-v2.2.1/CRAMPS/CRAMPS.pdf?raw=true -- Charles Steinkuehler char...@steinkuehler.net -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
